[arm-allstar] Auto conjest

[Tim Sawyer]

That message is somewhat misleading. It could have nothing to do with slowness or congestion. In our little world of app_rpt it generally means one end or the other isn’t setup properly. Things to check:

- Make sure the port in iax.conf is set up properly on both ends. 
- Check the port forwarding on the inbound node’s router. 
- Check if the firewall is off on the inbound node’s server. 
- Make sure the correct port (matches iax) is set on the servers in the AllStar Portal.
- Make sure both nodes are registered with the proper port. 
- Make sure extensions.conf has the node setting correct. 

Elaboration could be helpful on each of those points, but I leave it to the reader to post further queries as needed. 

--
Tim
:wq

> On May 29, 2015, at 3:06 PM, Robert Newberry <N1XBM at amsat.org> wrote:
> 
> What does it mean when I try to connect to a node and it says auto conjesting call dues to slow response.
> 
> This is on a BBB node.
> 
> N1XBM
> Apparare Scientor
> Paratus Communicare
> Allstar Node # 27086, 41540, 41812
>    
> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150529/4d96ed36/attachment-0001.html>