[arm-allstar] Allstar running on the Raspberry PI2

[(KP4TR)Ramon Gonzalez]

Corey,

I placed a downloadable zip on the same page. It is experimental and 
basic, no webserver, nothing fancy. Just a plain asterisk allstar 
app_rpt just to see that it works.

Ive already found a few issues with it and fixed it, so the latest works 
for me.


On 3/4/2015 11:26 PM, Corey Dean wrote:
> I would be very interested in this when you do it.  I don't have a pi yet but plan on getting one very soon!
>
> Corey n3fe
>
>> On Mar 4, 2015, at 8:57 PM, (KP4TR)Ramon Gonzalez <kp4tr.ramon at gmail.com> wrote:
>>
>> Hello,
>>
>> I thought Id see my own email post, so I thought email never arrived? oh well!
>>
>> My config files are from my BBB node I already had setup. But the initial install was from a github project by VK2ACP at https://github.com/anthcp/dahdi-linux-allstar-pi. But his project was for the older PI, and didn't work out of the box. My biggest headache was getting DAHDI to work, but I did learn alot from the excercise. Some tweaking and downloading additional packages, and it built and installed, but asterisk/app_rpt didn't work.
>>
>> I did get the latest source from app_rpt and the kernel source for the linux distro I have for archlinux for the PI2. After many builds and testing, dahdi finally worked and asterisk/app_rpt worked. I just used my existing conf files. I did have to tweak iax.conf because remote nodes would complain about ilbc codec. I commented it out and now works fine.
>>
>> I am about to do it all over again on a clean sd card, but documenting each step. And using all the dahdi sources, asterisk/app_rpt sources.
>>
>>> On 3/4/2015 6:45 PM, David McGough wrote:
>>> Hi Ramon,
>>>
>>> I saw your first (and this) e-mail....But, haven't had a free moment all
>>> day today until now (revenge of the day-job!).
>>>
>>> Anyhow, the RPi2 looks fantastic!  Did you use the BBB distro as a
>>> starting point?
>>>
>>>
>>> 73, David KB4FXC
>>>
>>>
>>>
>>>> On Wed, 4 Mar 2015, (KP4TR)Ramon Gonzalez wrote:
>>>>
>>>> Looks like my first email didn't make it out.......
>>>>
>>>>
>>>> Hello,
>>>>
>>>> Below is a video I put together shortly after getting Allstar running on
>>>> a Raspberry PI2. It runs without a hitch and CPU utilization is low.
>>>> At some point in the video I do show the PI2 running HTOP as well.
>>>>
>>>> I will clean it up in the next few days and implementation is probably
>>>> no different than the BBB. It also runs Archlinux.
>>>>
>>>>
>>>> http://irlplatino.net/wp/?page_id=738
>>>>
>>>>
>>>> 73's
>>> _______________________________________________
>>>
>>> arm-allstar mailing list
>>> arm-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>
>>> Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
>