[arm-allstar] PTT lockout with COR?

Cole Cunningham colecaz at gmail.com
Fri Mar 6 23:52:57 EST 2015


That did it, Corey.  Thanks a lot. I put linktolink=yes in both the public pseudo node and the private node with radio attached.  Now PTT from the web transceiver causes the radio to transmit regardless of whether it is receiving a signal or not.

 

Cole, AA7RD

 

From: arm-allstar-bounces at hamvoip.org [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of Corey Dean
Sent: Friday, March 06, 2015 9:44 PM
To: BeagleBone Black ARM Allstar
Subject: Re: [arm-allstar] PTT lockout with COR?

 

If I remember correctly you want the command linktolink=yes in the node stanza.  That will allow you to key the radio when the cor is active.

Corey


On Mar 6, 2015, at 9:27 PM, Cole Cunningham <colecaz at gmail.com> wrote:

I’m beginning to test my BBB lashup using the Allstar web transceiver and a mobile radio connected to a USB FOB and have run into a question.

 

I connect to my public node via the web and then connect it to a private node on the same BBB server.  The private node has a Motorola Radius mobile paired with it via the USB FOB.  Everything works fine back and forth on simplex, but when I change to the local repeater I cannot transmit as long as the repeater is transmitting and my radios COR is active.  After the repeater drops I can then transmit and talk as normal.

 

I have duplex=0 in rpt.conf for both the public and private nodes.  I use rxchannel=dadhi/pseudo for the public node without a radio attached and rxchannel=SimpleUSB/usb for the private node.  In SimpleUSB.conf duplex=1.

 

If I change duplex=0 to duplex=2 in rpt.conf for both nodes the system oscillates when on the repeater.  The repeater comes up, COR goes active, the node activates PTT, the radio transmits forcing COR inactive, PTT hang times expires, and the cycle starts over.  For some reason this seems to aggravate the other repeater users.  HI..

 

Is there a variable I can use while duplex=0 to allow transmitting to override the receiver active?

 

Cole, AA7RD

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150306/7991b522/attachment-0001.html>


More information about the arm-allstar mailing list