[arm-allstar] TM-V71A PC serial port comands?

[Sam Nabkey]

David...

So when. Using the hamlib code, is the node still configured as a remote?

Also,  is it possible to move the remote frequency by direct entry or does
it just to channel memories?
On Jun 22, 2015 6:37 PM, "David McGough" <kb4fxc at inttek.net> wrote:

>
> Hi Neil,
>
> I don't have a TM-V71A to test, but, I believe it is similar to the
> TM-D710 from a CAT control standpoint.  I'd probably try the D710 hamlib
> back-end (number: 234) as a starting point.
>
> 73, David KB4FXC
>
>
> On Mon, 22 Jun 2015, Neil k8it wrote:
>
> > I have been playing with the hamlib remote base commands with great
> success. I want to change radios to a more powerful radio. I am in need
> of a list or link to the Kenwood TM-V71A PC command set as it is not
> listed in the user manual. Does anyone have such a list or link?
> >
> > Thanks
> > 73 Neil Sablatzky  K8IT
> > Allstar Node 41838 KITLINK
> > Allstar Node 42087 KITLINK HUB
> > IRLP Node exp0068
> > Echolink K8IT-L
> >
> >
> >
> >
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB web page -
> http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150622/8d6270f3/attachment.html>