[arm-allstar] using BBB GPIO running asterisk v1.2.1 --- RPi2 GPIO

[Neil k8it]

Dave I think you just solved my problem. Could you please explain how to 
configure the extra GPIO in the URI and what commands to use to turn a gpio 
bit on or off? What I want to do is to control the radio power levels if 
allstar has a scheduled net.


Thanks
73 Neil Sablatzky  K8IT
Allstar Node 41838 KITLINK
Allstar Node 42087 KITLINK HUB
IRLP Node exp0068
Echolink K8IT-L


--------------------------------------------------
From: "David McGough" <kb4fxc at inttek.net>
Sent: Tuesday, June 09, 2015 1:09 PM
To: "ARM Allstar" <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] using BBB GPIO running asterisk v1.2.1 --- RPi2 
GPIO

>
> Hi Neil,
>
> The only GPIO available in the RPi2 1.0 and BBB 1.2.1 release is via the
> URI interface (or sound FOB). This all works as expected, just like all
> AllStar releases.
>
> GPIO via the RPi2 experimenter's bus (all the header pins on the side of
> the board) is part of the next software release, and will include
> documentation at that point (some things are still changing!).
>
> If you need GPIO immediately, use a URI. That'll get you there today--I
> use this capability all the time for fan control.
>
>
> 73, David KB4FXC
>
> On Tue, 9 Jun 2015, Neil k8it wrote:
>
>>
>> Doug
>> You had mentioned that the Raspberry PI Asterisk code directly supports 
>> some additional GPIO. Is there any write up on how to use it as part of a 
>> asterisk macro?
>>
>> Thanks
>> 73 Neil Sablatzky  K8IT
>> Allstar Node 41838 KITLINK
>> Allstar Node 42087 KITLINK HUB
>> IRLP Node exp0068
>> Echolink K8IT-L
>>
>>
>>
>>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB web page - 
> http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2015.0.5961 / Virus Database: 4355/9982 - Release Date: 06/09/15
>