[arm-allstar] second node startup problem
Neil k8it
k8it at cac.net
Tue Jul 28 13:29:51 EST 2015
well it helps if I copy and pasted the right ifo Doug.
[root at KITLINK asterisk]#
[root at KITLINK asterisk]#
[root at KITLINK asterisk]# lsusb
Bus 001 Device 005: ID 0d8c:013a C-Media Electronics, Inc.
Bus 001 Device 006: ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[root at KITLINK asterisk]#
any thoughts my friend?
Thanks
73 Neil Sablatzky K8IT
Allstar Node 41838 KITLINK
Allstar Node 42087 KITLINK HUB
IRLP Node exp0068
Echolink K8IT-L
WIRES-X K8IT 11479 Room 21479
From: Doug Crompton
Sent: Tuesday, July 28, 2015 12:17 AM
To: ARM Allstar
Subject: Re: [arm-allstar] second node startup problem
I see no usb FOB listed.
A BBB with one DMK URI -
[root at Abington-40879 local]# lsusb
Bus 002 Device 006: ID 0d8c:013a C-Media Electronics, Inc.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
A RPi2 with two modified FOBs -
[root at alarmpi local]# lsusb
Bus 001 Device 005: ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter
Bus 001 Device 004: ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
73 Doug
WA3DSP
http://www.crompton.com/hamradio
--------------------------------------------------------------------------------
From: k8it at cac.net
To: arm-allstar at hamvoip.org
Date: Mon, 27 Jul 2015 23:49:40 -0400
Subject: Re: [arm-allstar] second node startup problem
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[root at KITLINK ~]#
the output of lsusb
Thanks
73 Neil Sablatzky K8IT
Allstar Node 41838 KITLINK
Allstar Node 42087 KITLINK HUB
IRLP Node exp0068
Echolink K8IT-L
WIRES-X K8IT 11479 Room 21479
From: Doug Crompton
Sent: Monday, July 27, 2015 11:05 PM
To: ARM Allstar
Subject: Re: [arm-allstar] second node startup problem
What do you mean by the functions section? There is one functions section called functions<node> where node is the FIRST node. So both nodes use the same functions. You can change to a separate functions stanza for the second node if you like but normally you use one for both.
The only thing I can tell you is if you follow the directions exactly it does work. You can't plug in the second USB until it tells you to and you restart. Since I have no way of knowing what you did it would be hard to troubleshoot remotely.
Not showing up in the active node list at Allstarlink is not a good indication of whether things are working since sometimes nodes don't show up there. It looks like it is not seeing the second USB.
When you did a tune save on usb1 it said not active. Does the second USB show up in lsusb?
73 Doug
WA3DSP
http://www.crompton.com/hamradio
--------------------------------------------------------------------------------
From: k8it at cac.net
To: arm-allstar at hamvoip.org
Date: Mon, 27 Jul 2015 22:27:00 -0400
Subject: [arm-allstar] second node startup problem
following the instructions on page 10 of setting up a second node for raspberry pi, I was able to use susb active usb and then use susb tune usb successfully. then I edited the iax.conf, extensions.conf and rpt.conf files successfully. rpt.conf is still missing the FUNCTION stanza for the second node since the instructions did not add that yet.
I then used astdn.sh and astup.sh to reboot asterisk. next I tried the following but got this error. my primary node 41838 still works but my new node 42087 does not show up in the active node listing. Any suggestions on how to fix this?
Connected to Asterisk currently running on KITLINK (pid = 6136)
Verbosity is at least 3
== Refreshing DNS lookups.
KITLINK*CLI> susb active usb1
KITLINK*CLI> susb tune save
Device usb1 currently not active
and the following for reference only. my primary node is called usb and my second node is called usb1
KITLINK*CLI> susb active usb
KITLINK*CLI>
Thanks
73 Neil Sablatzky K8IT
Allstar Node 41838 KITLINK
Allstar Node 42087 KITLINK
IRLP Node exp0068
Echolink K8IT-L
WIRES-X K8IT 11479 Room 21479
_______________________________________________ arm-allstar mailing list arm-allstar at hamvoip.org http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the BBB and RPi2 web page - http://hamvoip.org
--------------------------------------------------------------------------------
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB and RPi2 web page - http://hamvoip.org
--------------------------------------------------------------------------------
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.6081 / Virus Database: 4392/10319 - Release Date: 07/27/15
_______________________________________________ arm-allstar mailing list arm-allstar at hamvoip.org http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the BBB and RPi2 web page - http://hamvoip.org
--------------------------------------------------------------------------------
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB and RPi2 web page - http://hamvoip.org
--------------------------------------------------------------------------------
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.6081 / Virus Database: 4392/10325 - Release Date: 07/28/15
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150728/efc2ea25/attachment.html>
More information about the arm-allstar
mailing list