[arm-allstar] CM108 - red LED?

[Sam Skolfield]

Thanks, Doug. Looking at the schematic at first made me think that the red
LED shown was the one already on the CM108. Now I see that your schematic
indicates that your red LED anode is not connected to a stock position.
Thanks for the help.

On Fri, Jul 17, 2015 at 5:32 AM, Doug Crompton <doug at crompton.com> wrote:

> No, that is completely normal for both the red and green LED's. The stock
> red LED will not show PTT. The mod adds the PTT LED. See the mod schematic.
>
>
>
> *73 DougWA3DSPhttp://www.crompton.com/hamradio
> <http://www.crompton.com/hamradio>*
>
>
> ------------------------------
> Date: Thu, 16 Jul 2015 23:52:04 -0700
> From: kj6qfs at gmail.com
> To: arm-allstar at hamvoip.org
> Subject: [arm-allstar] CM108 - red LED?
>
>
> Hello,
> I've just started playing with some CM108s (same ones as Doug's article)
> Everything seems fine, but the red LED does not light when my node (BBB
> image) transmits. The green LED does, however, begin to flash quickly until
> the node unkeys, and then it returns to a slower blinking. Is there some
> configuration that might have gotten screwy here, or are these maybe
> "mutant" CM108s?
>
> --
> KJ6QFS
> Sam Skolfield
>
> _______________________________________________ arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the
> BBB and RPi2 web page - http://hamvoip.org
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>



-- 
KJ6QFS
Sam Skolfield
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150717/ae6a2955/attachment.html>