[arm-allstar] Stopping DNS lookup

[Cole Cunningham]

Yes, that was a good location and the two lines commented out seem to have
fixed it.  At least when I rebooted the BBB the rpt_extnodes file did not
return after about 10 minutes.  I'll change the other four and monitor them.

 

Thanks

Cole

 

From: arm-allstar-bounces at hamvoip.org
[mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of Doug Crompton
Sent: Friday, January 30, 2015 9:49 PM
To: BeagleBone Black ARM Allstar
Subject: Re: [arm-allstar] Stopping DNS lookup

 

OK, Sorry I know you mentioned that before but I get so many emails. 

OK look in /etc/rc.local   and you should the two lines in there that I
mention in the prior email. Comment them out and reboot.

I don't have 1.1 running anymore so I am running from memory. I think that
is the location of rc.local


73 Doug
WA3DSP
http://www.crompton.com/hamradio



  _____  

From: colecaz at gmail.com
To: arm-allstar at hamvoip.org
Date: Fri, 30 Jan 2015 21:16:39 -0700
Subject: Re: [arm-allstar] Stopping DNS lookup

No, we're running version 1.1  We started with 1.2 but discovered it lacked
the cape manager and we plan to use the analog input functions it brings for
monitoring site voltages.  Things like AC mains, generator AC, battery
voltage, etc.  We'd gladly change if voltage monitoring was available.

 

Here is my etc directory:

 

[root at Beagle1 /usr/local/etc]#ls

total 20K

4.0K drwxr-xr-x  2 root root 4.0K Jun 16  2014 .

4.0K drwxr-xr-x 12 root root 4.0K May 19  2014 ..

4.0K -rwxr-x---  1 root root  988 May  7  2014 confirm_boot.sh

4.0K -rwxr-x---  1 root root 1.6K May  7  2014 morse_ip.sh

4.0K -rwxr-x---  1 root root 2.2K Jun 16  2014 rc.updatenodelist

[root at Beagle1 /usr/local/etc]#

 

Cole

 

 

From: arm-allstar-bounces at hamvoip.org
[mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of Doug Crompton
Sent: Friday, January 30, 2015 9:10 PM
To: BeagleBone Black ARM Allstar
Subject: Re: [arm-allstar] Stopping DNS lookup

 

Are you running 1.2.1 version???   The /usr/local/etc directory should look
like this -

[root at wa3dsp-40961-cm etc]# ls
allstar.env             asterisk_tpl     morse_ip.sh  rc.updatenodelist
allstar_node_info.conf  confirm_boot.sh  rc.allstar



73 Doug
WA3DSP
http://www.crompton.com/hamradio

  _____  

From: colecaz at gmail.com
To: arm-allstar at hamvoip.org
Date: Fri, 30 Jan 2015 20:10:17 -0700
Subject: Re: [arm-allstar] Stopping DNS lookup

Doug,

 

I checked all the iax.conf files and all register entries have been
commented out previously.  

 

The updating occurred with the register entries commented out.

 

I found re.updatenodelist where you said it should be but the rc.allstar
file is not there.  'find / -name rc.allstar' turns up nothing.  And looking
in /usr/local/sbin for the astdb.php file mentioned in the rc.allstar
changes didn't find it either.

 

So I'm lost.

 

Cole

 

From: arm-allstar-bounces at hamvoip.org
[mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of Doug Crompton
Sent: Friday, January 30, 2015 7:30 PM
To: BeagleBone Black ARM Allstar
Subject: Re: [arm-allstar] Stopping DNS lookup

 

Cole,

  Leave the dns lookup alone. If you do not register anything then the
rc.updatenodelist script should fail and not update the nodes but apparently
it is not. It writes the nodes to /tmp/rpt_extnodes which is a symbolic link
at /var/lib/asterisk/rpt_extnodes

Do you have any active (not commented) register lines in  iax.conf? If so
take them out and reboot and see if it updates the list in /tmp/rpt_extnodes
If it doesn't then disregard the following. It not then do the following to
stop all updates.

rc.updatenodelist is located in /usr/local/etc and is run by the rc.allstar
in that same directory.

Open  /usr/local/etc/rc.allstar and comment the lines to load the databases
-

# get node to IP database
/usr/local/etc/rc.updatenodelist &    <<<<< put a # before this line
# get node detail database
/usr/local/sbin/astdb.php &             <<<<< put a #before this line

Don't change anything else in the file and save.

Reboot and you should have no outside nodes listed. Be sure to comment the
statpost lines in all nodes.

Let me know what you ended up doing.

73 Doug
WA3DSP
http://www.crompton.com/hamradio


_______________________________________________ arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the BBB
web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/


_______________________________________________ arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the BBB
web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150130/66427897/attachment-0001.html>