[arm-allstar] Software ver 1.2 and BBB ver B

[Andrew Sylthe]

Jim,

I was having the exact same problem with my rev. B boards and ver. 1.2 of
Doug's release. I ended up fixing the problem by powering the board via the
barrel connector instead of the USB port. I never had the issue under ver.
1.1. I have 2 rev. B BBBs, and the same issue on both boards.

Thanks!
On Jan 8, 2015 4:12 PM, "Jim Korenz" <n8pxw at yahoo.com> wrote:

>   I have a problem running the new version software v1.2, on the BBB rev B
> board. I got everything up and running with ver 1.2 a few nights ago. I had
> an Echolink connect running fine. The next morning the USB audio FOB was
> dark, no heartbeat LED. I unplugged the FOB, and reinserted it. No lights.
> I could login to the BBB with putty, so I restarted Asterisk. Still no
> lights. Finally I did a shutdown -r now. The BBB came back up with the FOB
> green led flashing after a min or so. I checked back in an hour or two, the
> fob was dead again. Same story, I had to shutdown and restart the opsys.
> This went on for a couple of days. Finally, I transferred the SD card to my
> backup board a BBB rev C. No problems, the boards been running for 2 or 3
> days. I thought that the old BBB rev B took a crap. For grins, I reloaded
> the previous ver 1.1 on an SD card and brought up the rev B BBB board. It's
> been running for over 24hr with not a hang. It appears that the new rev
>  1.2 has a problem with the old rev B BBB board. At least, it does with
> mine. Has anyone else had this problem?
>     JimK  N8PXW
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB web page -
> http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150108/10203a48/attachment.html>