[arm-allstar] Az Repeater Assoc Project diagram

[Cole Cunningham]

Doug,

 

Here is a block diagram of our project goal.  Of course the lines between
the BBBs, the fobs, and the card cage on the diagram should have arrows on
both ends indicating two way signaling.

 

The rack between the radios and the fobs has a Comm Spec PL encode/decode
board on it and currently sends the PL decode signal to the controller along
with passing thru the COR from the radio as a separate line.  It sends the
transmit PL tone directly to the radio separate from the mic input.  The
radios are old Micors which have no smarts but do have separate mic, PTT, PL
tone in, COR, and discriminator audio lines.  

 

Also attached is a block diagram of one of our sites as it currently exists.
We are trying to emulate the RLC-3 as much as possible with a multiple BBB
controller.

 

If this is more info than you care to sift through, let me know and I'll not
clutter your inbox.  Hi..

 

Thanks for all the help.

 

Cole, AA7RD

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150203/fe510a83/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Shaw3Diag.pdf
Type: application/pdf
Size: 78696 bytes
Desc: not available
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150203/fe510a83/attachment-0002.pdf>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: BeagleBoard Black Site Diagram.pdf
Type: application/pdf
Size: 11172 bytes
Desc: not available
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150203/fe510a83/attachment-0003.pdf>