[arm-allstar] How To for using GPIO on the DMK URI?

[Tim Sawyer]

In simpleusb.conf or usbradio.conf

gpio1=out1     ; default pin to an output and set it high


A CLI like so will set it low:
asterisk -rx "rpt cmd <your node> cop 61 GPIO1=0"


or as a rpt function

1234 = cop,61,GPIO1=0     ; Set GPIO 1 low



There is some documentation here http://docs.allstarlink.org/drupal/node/105



On Fri, Dec 18, 2015 at 7:26 AM, John <wb5nfc at gmail.com> wrote:

> I'm just beginning to look at using some of the GPIO functions available
> in the Rpi2 / DMK URI. Looks like there are LOTS of different ways to
> accomplish the same task. To get started, I'd like to keep things as simple
> as possible. Really don't want to use the Pi's GPIO pins or an outboard USB
> device. Can someone point me in the right direction for information on
> controlling the URI's GPIO pins 1, 2 & 4?
>
>
> Thanks!
>
> John
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>



-- 
--
Tim
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20151218/78b67121/attachment.html>