[arm-allstar] arm-allstar Digest, Vol 19, Issue 2

Dave Vossler dvossler69 at gmail.com
Tue Dec 1 13:41:24 EST 2015


Bob,

simpleusb.conf settings

deemphasis=no
preemphasis=yes

also make sure these are set:

carrierfrom=usb
ctcssfrom=no

Last but not least make sure your 7800 is set to 1200 baud not 9600

Dave - K3DMV

On Tue, Dec 1, 2015 at 8:37 AM, <arm-allstar-request at hamvoip.org> wrote:

> Send arm-allstar mailing list submissions to
>         arm-allstar at hamvoip.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> or, via email, send a message with subject or body 'help' to
>         arm-allstar-request at hamvoip.org
>
> You can reach the person managing the list at
>         arm-allstar-owner at hamvoip.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of arm-allstar digest..."
>
>
> Today's Topics:
>
>    1. San Disk Ultra cards at Amazon (Doug Crompton)
>    2. Re: Allstar Newbie (Doug Crompton)
>    3. Allstar setup (Dave Vossler)
>    4. Re: Allstar setup (Robert Conklin)
>    5. Re: Allstar Newbie (Robert Conklin)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 1 Dec 2015 00:29:00 -0500
> From: Doug Crompton <doug at crompton.com>
> To: "arm-allstar at hamvoip.org" <arm-allstar at hamvoip.org>
> Subject: [arm-allstar] San Disk Ultra cards at Amazon
> Message-ID: <BLU171-W4E0B3B1905DBA2F5253E6BA0F0 at phx.gbl>
> Content-Type: text/plain; charset="iso-8859-1"
>
> San Disk Ultra micro SD cards are continually getting cheaper.   8GB -
> $5.99 and 16GB - $7.99 at Amazon.
>
>
> http://www.amazon.com/gp/product/B010Q57SEE?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
>
> 73 Doug
> WA3DSP
> http://www.crompton.com/hamradio
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20151201/76069e98/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 2
> Date: Tue, 1 Dec 2015 01:02:26 -0500
> From: Doug Crompton <doug at crompton.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] Allstar Newbie
> Message-ID: <BLU171-W104B2442F05F690467ECF53BA0F0 at phx.gbl>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Robert,
>
>  I went back and looked at your original message. The RPi2 images uses
> simpleusb not usbradio. You need to use simpleusb-tune-menu to set audio
> levels.  Simpleusb uses  COS, PTT, audio in and audio out to your radio.
>
> 73 Doug
> WA3DSP
> http://www.crompton.com/hamradio
>
>
> Date: Mon, 30 Nov 2015 22:37:17 -0600
> From: n4wgy.ham at gmail.com
> To: arm-allstar at hamvoip.org
> Subject: Re: [arm-allstar] Allstar Newbie
>
> Hi Doug, got the image installed & went thru the setup while reading along
> your setup guide. Still having same problems so am quite convinced it is
> something simple I am overlooking.
> -Rob
> On Mon, Nov 30, 2015 at 10:13 PM, Robert Conklin <n4wgy.ham at gmail.com>
> wrote:
> Fair enough! Am downloading and installing the RPi_V1.0 image now.Will let
> you know how it goes. Thank you for responding so fast and fo the nice
> welcome.
> -Rob
> On Mon, Nov 30, 2015 at 9:40 PM, Doug Crompton <doug at crompton.com> wrote:
>
>
>
> Rob,
>
>  Welcome to Allstar. Unfortunately this email list is not for that
> release. Our release is at hamvoip.org and I think you will find it a
> better and soon with our next update a much improved release. It is very
> easy to install. If you want to continue with the release you are using
> then the app_rpt list is the one you want.
>
> 73 Doug
> WA3DSP
> http://www.crompton.com/hamradio
>
>
> Date: Mon, 30 Nov 2015 21:26:43 -0600
> From: n4wgy.ham at gmail.com
> To: arm-allstar at hamvoip.org
> Subject: [arm-allstar] Allstar Newbie
>
> Greetings to the forum.My name is Rob I am very new to Allstar Link and
> have some questions regarding the setup of my first server/node. Any and
> all help and advise will be hugely and genuinely appreciated!
> Setup:Rpi 2 running the Rpi2_dial imageURIx interface (no eeprom) to an
> FT-7800.port forwarding 4569 UDP and 222 TCP
> When I run "radio-tune-menu", audio is getting thru the radio in both
> directions.
> When I go to the web transceiver to test I cannot connectWhen I try to
> send dtmf to the node radio I get no response.
> Am sure its something simple and obvious, probably a loose nut between my
> headsets.Thanks again for any advise! I will happily answer any questions
> to help zero in on a solution.
> Sincerely,Rob ConklinN4WGY
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
> _______________________________________________
>
>
>
> arm-allstar mailing list
>
> arm-allstar at hamvoip.org
>
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
>
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
>
>
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20151201/2d4fbf1d/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 3
> Date: Tue, 1 Dec 2015 01:07:46 -0500
> From: Dave Vossler <dvossler69 at gmail.com>
> To: arm-allstar at hamvoip.org
> Subject: [arm-allstar] Allstar setup
> Message-ID:
>         <CAOFeRySs9VHNnL_M28rg9fgMvRcHDXDenqD4HV=eiRGB7Uh=
> bQ at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Bob,
> I believe your issue is in your simpleusb.conf file found in /etc/asterisk.
> Preemphasis and deemphasis need to be set properly for the 7800. I can send
> you settings in the morning. Also follow the URI settings for your radio.
> Hope that helps
>
> Dave K3DMV
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20151201/3cabf0ac/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 4
> Date: Tue, 1 Dec 2015 07:35:35 -0600
> From: Robert Conklin <n4wgy.ham at gmail.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] Allstar setup
> Message-ID:
>         <
> CACqWnUZ8ERzpcdmD8MchJmiHropToWAuJz0bS62-p_d5gw9tCA at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Thank you Dave, please do when able. Am getting audio from the URI to the
> radio, but do not appear to be getting audio from the radio to the URI.
> Verified with a scope that the audio from the radio is getting to pin 21 on
> the URI, but not seeing it on simpleusb-tune-menu item 2.
> Getting close with some help!
>
> -Rob
> N4WGY
>
> On Tue, Dec 1, 2015 at 12:07 AM, Dave Vossler <dvossler69 at gmail.com>
> wrote:
>
> > Bob,
> > I believe your issue is in your simpleusb.conf file found in
> > /etc/asterisk. Preemphasis and deemphasis need to be set properly for the
> > 7800. I can send you settings in the morning. Also follow the URI
> settings
> > for your radio. Hope that helps
> >
> > Dave K3DMV
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2 web page - http://hamvoip.org
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20151201/2e92c1bc/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 5
> Date: Tue, 1 Dec 2015 07:37:35 -0600
> From: Robert Conklin <n4wgy.ham at gmail.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] Allstar Newbie
> Message-ID:
>         <
> CACqWnUYs7N+iFaPLOHd_FyzFMfT_j9N-+2PEG4ecFYvPPC6VtA at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Thank you for that Doug,
> Am getting audio from the URI to the radio, but do not appear to be getting
> audio from the radio to the URI. Verified with a scope that the audio from
> the radio is getting to pin 21 on the URI, but not seeing it on
> simpleusb-tune-menu item 2.
> Getting close with some help!
>
> -Rob
> N4WGY
>
> On Tue, Dec 1, 2015 at 12:02 AM, Doug Crompton <doug at crompton.com> wrote:
>
> >
> > Robert,
> >
> >  I went back and looked at your original message. The RPi2 images uses
> > simpleusb not usbradio. You need to use simpleusb-tune-menu to set audio
> > levels.  Simpleusb uses  COS, PTT, audio in and audio out to your radio.
> >
> >
> >
> > *73 DougWA3DSPhttp://www.crompton.com/hamradio
> > <http://www.crompton.com/hamradio>*
> >
> >
> > ------------------------------
> > Date: Mon, 30 Nov 2015 22:37:17 -0600
> > From: n4wgy.ham at gmail.com
> > To: arm-allstar at hamvoip.org
> > Subject: Re: [arm-allstar] Allstar Newbie
> >
> >
> > Hi Doug, got the image installed & went thru the setup while reading
> along
> > your setup guide. Still having same problems so am quite convinced it is
> > something simple I am overlooking.
> >
> > -Rob
> >
> > On Mon, Nov 30, 2015 at 10:13 PM, Robert Conklin <n4wgy.ham at gmail.com>
> > wrote:
> >
> > Fair enough! Am downloading and installing the RPi_V1.0 image now.
> > Will let you know how it goes. Thank you for responding so fast and fo
> the
> > nice welcome.
> >
> > -Rob
> >
> > On Mon, Nov 30, 2015 at 9:40 PM, Doug Crompton <doug at crompton.com>
> wrote:
> >
> > Rob,
> >
> >  Welcome to Allstar. Unfortunately this email list is not for that
> > release. Our release is at hamvoip.org and I think you will find it a
> > better and soon with our next update a much improved release. It is very
> > easy to install. If you want to continue with the release you are using
> > then the app_rpt list is the one you want.
> >
> >
> >
> > *73 DougWA3DSPhttp://www.crompton.com/hamradio
> > <http://www.crompton.com/hamradio>*
> >
> >
> > ------------------------------
> > Date: Mon, 30 Nov 2015 21:26:43 -0600
> > From: n4wgy.ham at gmail.com
> > To: arm-allstar at hamvoip.org
> > Subject: [arm-allstar] Allstar Newbie
> >
> >
> > Greetings to the forum.
> > My name is Rob I am very new to Allstar Link and have some questions
> > regarding the setup of my first server/node. Any and all help and advise
> > will be hugely and genuinely appreciated!
> >
> > Setup:
> > Rpi 2 running the Rpi2_dial image
> > URIx interface (no eeprom) to an FT-7800.
> > port forwarding 4569 UDP and 222 TCP
> >
> > When I run "radio-tune-menu", audio is getting thru the radio in both
> > directions.
> >
> > When I go to the web transceiver to test I cannot connect
> > When I try to send dtmf to the node radio I get no response.
> >
> > Am sure its something simple and obvious, probably a loose nut between my
> > headsets.
> > Thanks again for any advise! I will happily answer any questions to help
> > zero in on a solution.
> >
> > Sincerely,
> > Rob Conklin
> > N4WGY
> >
> > _______________________________________________ arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the
> > BBB and RPi2 web page - http://hamvoip.org
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2 web page - http://hamvoip.org
> >
> >
> >
> >
> > _______________________________________________ arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the
> > BBB and RPi2 web page - http://hamvoip.org
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2 web page - http://hamvoip.org
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20151201/b156e026/attachment.html
> >
>
> ------------------------------
>
> _______________________________________________
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
>
> End of arm-allstar Digest, Vol 19, Issue 2
> ******************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20151201/1ef49141/attachment-0001.html>


More information about the arm-allstar mailing list