[arm-allstar] Remote reboot

[Neil k8it]

can you explain this idea in more detail.
what are the SCOM'S   logic pins. being at remote sites being able to power cycle is a very valuable feature remotely


Thanks
73 Neil Sablatzky  K8IT
Allstar Node 41838 KITLINK
Allstar Node 42087 KITLINK HUB
IRLP Node exp0068
Echolink K8IT-L
WIRES-X K8IT 11479 Room 21479


From: Sione Ragle 
Sent: Friday, August 07, 2015 4:45 PM
To: Eric Harrison ; ARM Allstar 
Subject: Re: [arm-allstar] Remote reboot



I would think a simple way to do this is add a relay for the power to the Rpi2 that you turn off the power and turn it back on via the SCOM's logic pins.

On 8/7/2015 11:44 AM, Eric Harrison wrote:

  Having a problem with the rpi2 locking up  after issuing a astres.sh command. This is installed at a repeater site some distance away from my
  home. I also have a 7330 at the same site and was wanting to use a 
  logic out to reboot the rpi2 in this situation. Any ideas on the best approch
  to accomplished this? Power cycle relay? Reboot pin on GPIO? Or using
  watchdog internal timer?  

  Eric (N7JYS)



  Marshall's Communications

   

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org



--------------------------------------------------------------------------------


_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 


--------------------------------------------------------------------------------


No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.6125 / Virus Database: 4401/10391 - Release Date: 08/07/15
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150807/37de34f1/attachment.html>