[arm-allstar] Remote reboot

[Sione Ragle]

I would think a simple way to do this is add a relay for the power to 
the Rpi2 that you turn off the power and turn it back on via the SCOM's 
logic pins.

On 8/7/2015 11:44 AM, Eric Harrison wrote:
> Having a problem with the rpi2 locking up  after issuing a astres.sh 
> command. This is installed at a repeater site some distance away from my
> home. I also have a 7330 at the same site and was wanting to use a
> logic out to reboot the rpi2 in this situation. Any ideas on the best 
> approch
> to accomplished this? Power cycle relay? Reboot pin on GPIO? Or using
> watchdog internal timer?
> Eric (N7JYS)
>
>
> Marshall's Communications
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150807/3018e60f/attachment.html>