[arm-allstar] New RPI2 installation IAXRpt drops out.

[Doug Crompton]

Bernie,

 You are having too many problems there. Perhaps you have a bad image or bad hardware. What you are seeing is not normal. I think you should try a new image and or hardware. 
73 Doug
WA3DSP
http://www.crompton.com/hamradio


> From: bmcintosh at paceprofessional.co.uk
> To: arm-allstar at hamvoip.org
> Date: Wed, 5 Aug 2015 09:58:07 +0100
> Subject: Re: [arm-allstar] New RPI2 installation IAXRpt drops out.
> 
> 
> Doug,
> 
> It does need to be two way - I was expressing myself poorly tying to explain
> part of the problem.
> 
> Overnight the "solution" that I found has failed. Lots of strange behaviour,
> and regular "Hangup 'DAHDI/Pseudo-46535" messages on console.
> 
> dahdi show channels shows around 20 channels in use.  
> 
> All ok on reboot but there's ovbviously something funny going on in the long
> term.
> 
> Am I right in thinking that the DAHDI channels are  channels that link the
> USBRadio module ? And that there shouldn't be twenty of them ? 
> 
> Cheers
> 
> Benrie
> GM4WZG
> 
> 
> 
> Bernie,
> 
> Glad you found a solution. usbradio will work although it can have rough
> audio even in the best of conditions on a PC. If it satisfies you then
> great. Also if this is a one way, just RX, why not leave the COS always
> keyed in simpleusb. Maybe I don't get the whole picture but if it is a
> private just to iaxrpt that should work. iaxrpt is full duplex in that you
> can send commands and audio downstream even if the other end is keyed.
> 73 Doug
> WA3DSP
> http://www.crompton.com/hamradio
> 
> 
> 
> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2 web page - http://hamvoip.org
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150805/b0bc1b89/attachment.html>