[arm-allstar] New RPI2 installation IAXRpt drops out.

[Bernie McIntosh]

Doug,

It does need to be two way - I was expressing myself poorly tying to explain
part of the problem.

Overnight the "solution" that I found has failed. Lots of strange behaviour,
and regular "Hangup 'DAHDI/Pseudo-46535" messages on console.

dahdi show channels shows around 20 channels in use.  

All ok on reboot but there's ovbviously something funny going on in the long
term.

Am I right in thinking that the DAHDI channels are  channels that link the
USBRadio module ? And that there shouldn't be twenty of them ? 

Cheers

Benrie
GM4WZG



Bernie,

Glad you found a solution. usbradio will work although it can have rough
audio even in the best of conditions on a PC. If it satisfies you then
great. Also if this is a one way, just RX, why not leave the COS always
keyed in simpleusb. Maybe I don't get the whole picture but if it is a
private just to iaxrpt that should work. iaxrpt is full duplex in that you
can send commands and audio downstream even if the other end is keyed.
73 Doug
WA3DSP
http://www.crompton.com/hamradio