[arm-allstar] Echolink Config on RaspberryPi2

[Doug Crompton]

John,

Also make sure that in /etc/asterisk/modules.conf  has this line -

;noload=chan_echolink.so

The line has to have a ;  before it as shown to comment it out. This is the way the BBB and RPi2 should be by default. Make sure it is that way. If that was not commented you would not see the echolink command in the client and it obviously would not work.
73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Wed, 22 Apr 2015 21:38:54 -0500
From: wb5nfc at gmail.com
To: arm-allstar at hamvoip.org
Subject: [arm-allstar] Echolink Config on RaspberryPi2

Well, I thought I knew how to do this... but apparently not. 
Steps for making Echolink work on the Pi:

(1) Configure the echolink file with the appropriate information for your node(2) Rename the file echolink.conf(3) Reload / reboot to make the file active(4) Wait until Echolink picks up the node info
What am I missing?
John








-- 
John Kenney


_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/ 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150423/5d88a9c8/attachment.html>