[arm-allstar] Echolink Config on RaspberryPi2

[Doug Crompton]

John,

  Yes, that is all right.   If you go into the client -

asterisk -rvvv      and you give the echolink command is it there?

CLI> echolink ?
dbdump  dbget   debug

Then type -

CLI> echolink dbget call WA3DSP-L
147090|WA3DSP-L|73.30.112.57

My call should be in the database. You do have to type it in uppercase as shown.
73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Wed, 22 Apr 2015 21:38:54 -0500
From: wb5nfc at gmail.com
To: arm-allstar at hamvoip.org
Subject: [arm-allstar] Echolink Config on RaspberryPi2

Well, I thought I knew how to do this... but apparently not. 
Steps for making Echolink work on the Pi:

(1) Configure the echolink file with the appropriate information for your node(2) Rename the file echolink.conf(3) Reload / reboot to make the file active(4) Wait until Echolink picks up the node info
What am I missing?
John








-- 
John Kenney


_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/ 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150422/a577d54f/attachment.html>