[arm-allstar] CW ID

[Jon Rorke]

This is what I was thinking. If connected Allstar node to Allstar node 
then CW ids are sent over the link. So connecting to 27339 on the East 
Coast Reflector should not have been a problem. That Allstar node is 
bridged at the reflector by the folks that own it.

Having said that if you want to turn off all ids, set duplex=0 in 
Rpt.conf. That kills all telemetry. And if connecting to a harwarwe 
controller you can use the linktolink= yes for a full duplex no tail/ no 
telemetry mode.

Jon VA3RQ

On 4/17/2015 5:21 AM, Hugo Escalante wrote:
> Honestly Tim you shouldn't accused before you have all the facts.
>
> 1. Not going thru anyone's repeater input.
> 2. Duplex set to 1.
> 3. East Coast IRLP Reflector 9050 has a Allstar Node 27339 for there 
> Tuesday night nets.
>
> I believe there was a mistake somewhere, because I haven't run across 
> this problem
> before and I was blame for it. Thanks for the help guys.
>
> Hugo
> K7HJE
>
>
>
> On Apr 16, 2015, at 11:32 PM, Tim Sawyer <tim.sawyer at mac.com 
> <mailto:tim.sawyer at mac.com>> wrote:
>
>> Are you liking into a repeater’s input, with your node using the 
>> repeater as a mobile, HT or bast station? I call that in-band 
>> linking. If so that’s really bad form. The ID is only one of the 
>> issues with doing in-band linking.
>>
>> You said something about the East Coast reflector. Is that IRLP or 
>> Echolink?
>>
>> Honestly, you should not in-band link and should stop now. And be 
>> advised that IRLP and Echolink do not want connections from other 
>> networks including AllStar.
>> --
>> Tim
>> :wq
>>
>>> On Apr 16, 2015, at 6:21 PM, Hugo Escalante <ewplinc at gmail.com 
>>> <mailto:ewplinc at gmail.com>> wrote:
>>>
>>> Doug,
>>>
>>> I just want to get rid of the CW ID, I have received complaints on 
>>> the Node 27339 East Coast Reflector that my CW ID is not permitted.
>>>
>>> Hugo
>>> K7HJE
>>>
>>> On Tue, Apr 14, 2015 at 10:50 PM, Doug Crompton <doug at crompton.com 
>>> <mailto:doug at crompton.com>> wrote:
>>>
>>>     Well if you are using it on a radio an ID is required but I am
>>>     sure you know that.
>>>
>>>     Do you want to get rid of all ID's or just the cw id?
>>>
>>>     The main cw ID is  the idrecording= command in rpt.conf
>>>
>>>     idtalkover=      is the ID that is played when someone keys up
>>>     during the idrecording id.
>>>
>>>     In other words iof you have idrecording set ot a voice ID and
>>>     idtalkover set to a CW ID then if the voice ID is playing and
>>>     someone keys up it will immediately switch to the CW ID.
>>>
>>>     *73 Doug
>>>     WA3DSP
>>>     http://www.crompton.com/hamradio*
>>>
>>>
>>>     > From: ewplinc at gmail.com <mailto:ewplinc at gmail.com>
>>>     > Date: Tue, 14 Apr 2015 21:24:59 -0400
>>>     > To: arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
>>>     > Subject: [arm-allstar] CW ID
>>>     >
>>>     >
>>>     > Any help on getting rid of my CW ID on my AllStar Node.
>>>     >
>>>     > Hugo
>>>     > K7HJE
>>>     > _______________________________________________
>>>     >
>>>     > arm-allstar mailing list
>>>     > arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
>>>     > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>     >
>>>     > Visit the BBB web page -
>>>     http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
>>>     >
>>>
>>>     _______________________________________________
>>>
>>>     arm-allstar mailing list
>>>     arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
>>>     http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>
>>>     Visit the BBB web page -
>>>     http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
>>>
>>>
>>> _______________________________________________
>>>
>>> arm-allstar mailing list
>>> arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>
>>> Visit the BBB web page - 
>>> http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
>>
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB web page - 
>> http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150417/fb910654/attachment.html>