[arm-allstar] Tx gain

[Doug Crompton]

I have found that in most cases you do not need to use 12V for the 6db amp. Try 5V which is available on the 25 pin connector. Look at the DR1 Yaesu Fusion how-to mod I put out on the web page. It uses the 6db amp wired to 5V and gives the pin outs. It is very easy to accomplish on the DMK URI.

If you are using the rigs mic input it is surprising you don't have enough gain.

73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Sat, 11 Apr 2015 14:33:13 -0400
From: N1XBM at amsat.org
To: arm-allstar at hamvoip.org
Subject: Re: [arm-allstar] Tx gain

Thank you Tim,
Looks like 12 volts, a jumper and move a wire and I should be in business. 

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/ 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150411/987ee4bf/attachment.html>