[arm-allstar] Install and configure docs and radio settings
jzynel at comcast.net
Sun Oct 26 21:38:36 EST 2014
Advance Repeater System USB FOB
Connects to mic and speaker
RX Level Setting 350
TX A Level Setting 999
The RX setting level also depends on where you set the volume dial.
From: arm-allstar-bounces at hamvoip.org
[mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of Doug Crompton
Sent: Sunday, October 26, 2014 1:48 AM
To: arm-allstar at hamvoip.org
Subject: [arm-allstar] Install and configure docs and radio settings
So far I have had positive comments about the configuration and
documentation on version 1.2.1 but as with anything it can always be
improved. If you have any comments on the documentation or initial
configuration on 1.2.1 please forward them to me. Your input will certainly
be considered and will help to improve future releases.
I would also like to start a radio database that will help with an automated
simpleusb.conf setup on the next release. In most cases the only thing that
changes in simpleusb is the "carrierfrom" setting depending on the phase of
your node radios COS signal. We know about Alinco radios but not many
others. If you can forward the make and model of your radio and any changes
you make to simpleusb.conf it would be helpful. Also your rx and txa levels
for that radio and if it is connected to a standard port on the radio or is
a custom modification.
Some radios that are programmable, like Motorola's, and can have the COS
phase set either way.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the arm-allstar