[arm-allstar] Installing EZStream on BBB for Broadcastify.com

[Bob Prybyzerski]

Thanks for sharing. I've been running a streaming audio feed with a separate computer and receiver. This looks like a nice alternative. 
Bob W2YMM

Sent from my iPhone
Bob Prybyzerski
631-960-1051

> On Oct 25, 2014, at 1:22 PM, "(KP4TR)Ramon Gonzalez" <kp4tr.ramon at gmail.com> wrote:
> 
> Hello,
> 
> I posted the below message on wrong allstar reflector, but may be helpful for anyone wanting to stream audio with Allstar.
> 
> To install EZStream for streaming audio, see below commands.
> 
> cd /root
> pacman -S lame
> pacman -S pkg-config
> pacman -S libshout
> wget http://downloads.xiph.org/releases/ezstream/ezstream-0.5.6.tar.gz
> tar xvzf ezstream-0.5.6.tar.gz
> cd ezstream-0.5.6
> ./configure
> 
> If all is good, run:
> make
> make install 
> 
> To add streaming audio in Allstar, add this to rpt.conf under the node stanza, with an appropriately configured ezstream.xml
> 
> ;Stream to Broadcastify
> outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8.0 --bitwidth 16 - - | /usr/local/bin/ezstream -c /etc/ezstream.xml
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20141025/f5e295c9/attachment.html>