[arm-allstar] Install and configure docs and radio settings

[Andy Wittman]

Sorry to be a bother but does anyone have similar configuration instructions for the Yaesu 857D?

Thanks,
Andy

Sent from my iPhone

> On Oct 28, 2014, at 19:36, "(KP4TR)Ramon Gonzalez" <kp4tr.ramon at gmail.com> wrote:
> 
> The Kenwood TM-D700 specific setting is below. It was important to add the "rxondelay" so as to avoid squelch opening when going to RX.
> This radio ignores PL tones on receive via data port.
> 
> In simpleusb-tune-menu set audio to:
> RX set to 200
> TX level set to 50
> 
> 
> rxondelay=25            ; This will instruct the usbradio driver to ignore the COR line
>                        ; for a specified number of 20mSec intervals following the release of PTT.
> 
> carrierfrom=usb         ; no,usb,usbinvert
>                        ; no - no carrier detection at all
>                        ; usb - from the COR line on the modified USB sound fob
>                        ; usbinvert - from the inverted COR line on the modified USB sound fob
> 
> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/