[arm-allstar] WIfi Error
Joe Zynel
jzynel at comcast.net
Mon Nov 3 14:16:18 EST 2014
Doug,
Thanks, I saw that. To make it easy Ill probably just buy that one.
Joe
N3FHW
_________________________________________________________________
From: arm-allstar-bounces at hamvoip.org
[mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of Doug Crompton
Sent: Monday, November 03, 2014 2:14 PM
To: BeagleBone Black ARM Allstar
Subject: Re: [arm-allstar] WIfi Error
OK, well keep in mind that as per the docs the supported wifi adapter is the
one listed, the Asus N10. It works and works well. Others will need drivers
etc and possibly different setup.
73 Doug
WA3DSP
http://www.crompton.com/hamradio
_____
From: jzynel at comcast.net
To: arm-allstar at hamvoip.org
Date: Mon, 3 Nov 2014 13:34:21 -0500
Subject: Re: [arm-allstar] WIfi Error
Doug and Chris,
The hardware was recognized when I did the lsusb command. The hub is a 7
port powered. The wifi is a edimax.
I think the hub was working as I had the USB FOB plugged into it and it was
working.
Thanks
Joe
N3FHW
_________________________________________________________________
W. Joseph Zynel | General Adjuster | Zynel Adjusting Inc.
+P.O. Box 318 | Hampstead, MD 21074 | (: 410.239.0107 (O) | 7: 410.239.0108
(F)
*: <mailto:jzynel at zynel.com> jzynel at zynel.com | ::
http://www.zynel.com | ): 443.904.5676 (M)
<http://www.zynel.com/Zynel.vcf> CLICK HERE TO GET MY V-CARD
The information contained in this communication may be confidential, is
intended only for the use of the recipient named above, and may be legally
privileged. If the reader of this communication is not the intended
recipient, you are hereby notified that any dissemination, distribution, or
copying of this communication, or any of its contents, is strictly
prohibited. If you have received this communication in error, please
re-send this communication to the sender and delete the original message and
any copy of it from your computer system.
From: arm-allstar-bounces at hamvoip.org
[mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of Doug Crompton
Sent: Monday, November 03, 2014 1:28 PM
To: BeagleBone Black ARM Allstar
Subject: Re: [arm-allstar] WIfi Error
Joe,
What is your wifi hardware? Hub? Is the HW recognized?
I am sure Chris will chime in on this.
73 Doug
WA3DSP
http://www.crompton.com/hamradio
_____
From: jzynel at comcast.net
To: arm-allstar at hamvoip.org
Date: Mon, 3 Nov 2014 11:48:00 -0500
Subject: [arm-allstar] WIfi Error
Doug,
I get an error when trying to initialize Wifi. Below is the session:
[root at bbb-allstar netctl]# systemctl status netctl at wlan0.service -l
● netctl at wlan0.service - Automatically generated profile by wifi-menu
Loaded: loaded (/etc/systemd/system/netctl at wlan0.service; enabled)
Active: failed (Result: exit-code) since Mon 2014-11-03 11:37:31 EST;
3min 40s ago
Docs: man:netctl.profile(5)
Main PID: 922 (code=exited, status=1/FAILURE)
Nov 03 11:37:30 bbb-allstar network[922]: Starting network profile
'wlan0'...
Nov 03 11:37:30 bbb-allstar network[922]: The interface of network profile
'wlan0' is already up
Nov 03 11:37:31 bbb-allstar systemd[1]: netctl at wlan0.service: main process
exited, code=exited, status=1/FAILURE
Nov 03 11:37:31 bbb-allstar systemd[1]: Failed to start Automatically
generated profile by wifi-menu.
Nov 03 11:37:31 bbb-allstar systemd[1]: Unit netctl at wlan0.service entered
failed state.
[root at bbb-allstar netctl]# journalctl -xn
-- Logs begin at Fri 1999-12-31 19:00:03 EST, end at Mon 2014-11-03 11:42:15
EST. --
Nov 03 11:41:42 bbb-allstar ntpd[821]: unable to create socket on wlan0 (9)
for fe80::821f:2ff:fee7:1f58%3#123
Nov 03 11:41:42 bbb-allstar ntpd[821]: failed to init interface for address
fe80::821f:2ff:fee7:1f58%3
Nov 03 11:42:01 bbb-allstar crond[960]: pam_unix(crond:session): session
opened for user root by (uid=0)
Nov 03 11:42:01 bbb-allstar CROND[961]: (root) CMD
((/usr/local/bin/Weather/getWxAlert MDC013 "Carroll" &> /dev/null 2>&1))
Nov 03 11:42:01 bbb-allstar named[218]: network unreachable resolving
'alerts.weather.gov/A/IN': 2001:500:1::803f:235#53
Nov 03 11:42:01 bbb-allstar named[218]: network unreachable resolving
'alerts.weather.gov/AAAA/IN': 2001:500:1::803f:235#53
Nov 03 11:42:01 bbb-allstar named[218]: network unreachable resolving
'alerts.weather.l.noaa.gov/A/IN': 2610:20:8c00:8c00::2#53
Nov 03 11:42:01 bbb-allstar named[218]: network unreachable resolving
'alerts.weather.l.noaa.gov/A/IN': 2610:20:8000:8c00::237#53
Nov 03 11:42:01 bbb-allstar named[218]: network unreachable resolving
'alerts.weather.l.noaa.gov/A/IN': 2610:20:8800:8c00::237#53
Nov 03 11:42:15 bbb-allstar CROND[960]: pam_unix(crond:session): session
closed for user root
[root at bbb-allstar netctl]# unable to create socket on wlan0
Any thoughts?
Joe
N3FHW
_________________________________________________________________
W. Joseph Zynel | General Adjuster | Zynel Adjusting Inc.
+P.O. Box 318 | Hampstead, MD 21074 | (: 410.239.0107 (O) | 7: 410.239.0108
(F)
*: <mailto:jzynel at zynel.com> jzynel at zynel.com | ::
http://www.zynel.com | ): 443.904.5676 (M)
<http://www.zynel.com/Zynel.vcf> CLICK HERE TO GET MY V-CARD
The information contained in this communication may be confidential, is
intended only for the use of the recipient named above, and may be legally
privileged. If the reader of this communication is not the intended
recipient, you are hereby notified that any dissemination, distribution, or
copying of this communication, or any of its contents, is strictly
prohibited. If you have received this communication in error, please
re-send this communication to the sender and delete the original message and
any copy of it from your computer system.
From: arm-allstar-bounces at hamvoip.org
[mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of Doug Crompton
Sent: Monday, November 03, 2014 10:34 AM
To: BeagleBone Black ARM Allstar
Subject: Re: [arm-allstar] Pre-recorded broadcasts
That might solve the local problem but if he is connected to other nodes the
radios on those nodes would probably have timeouts and most are hard set in
the radios or repeaters. So it gets complicated. You should really break at
least every three minutes to reset timeouts of any nodes or repeaters along
the way. I have heard newsline on the air with these breaks and I don't
think it is manually created. It breaks right in the middle of a word and
then picks back up at that point. So a script the parses the audio file in
about 3 minutes chunks would be the best thing.
73 Doug
WA3DSP
http://www.crompton.com/hamradio
> From: tim.sawyer at mac.com
> Date: Mon, 3 Nov 2014 06:47:21 -0800
> To: jim.pilgram at gmail.com; arm-allstar at hamvoip.org
> Subject: Re: [arm-allstar] Pre-recorded broadcasts
>
> Would turning off the timeout timer during the newscast be an option for
you? If so check out COP 7 and 8 and/or the Control State Stanza
(http://docs.allstarlink.org/drupal/node/18). You could use those along with
cron (or the app_rpt scheduler) to switch at a regular time, say every
Monday at 7:30 PM.
>
> Post back here if you want to pursue this and we’ll work through the
details.
>
> --
> Tim WD6AWP
>
> > On Nov 2, 2014, at 9:10 PM, James R. Pilgram <jim.pilgram at gmail.com>
wrote:
> >
> > Aloha,
> > I'm looking for some input on broadcasting Amateur Radio Newsline on our
local system.
> > Here's how I'm currently doing it. I download the broadcast on a laptop
with Ubuntu Linux then edit it with Audacity with 6 second pauses
> > every 2 minutes to keep from timing out the repeaters and simplex nodes
on the system. Then when it comes time
> > to run the program, I hook the laptop that it is recorded on through a 2
channel mixer to my regular laptop running
> > Windoze 7 into the IaxRpt client into my hub. Then I manually key and
un-key the iaxRpt client at the 6 second pauses
> > as the program plays.
> >
> > Here's what I would like to do.... I would like to make this pretty much
automatic. I don't mind doing the recording,
> > but I would like it if I could have it start at the designated time and
un-key itself at the 6 second pauses and re-key at the end of the pause
> > un-attended.
> > If I could drop this on my BBB node or my Acid based hub, this would be
be great.
> >
> > Any suggestions greatly appreciated. I'm not real Linux literate and
google is my friend I am trying to ween myself from windoze.
> >
> > Aloha,
> > Jim NH6HI
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB web page -
http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB web page -
http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
_______________________________________________ arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the BBB
web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
_______________________________________________ arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the BBB
web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20141103/b162bacc/attachment-0001.html>
More information about the arm-allstar
mailing list