[arm-allstar] arm-allstar Digest, Vol 1, Issue 27

[gm4upx at gb7jd.co.uk]

> 
> Message: 3
> Date: Sat, 28 Jun 2014 22:09:35 -0400
> From: Doug Crompton <doug at crompton.com>
> To: "arm-allstar at hamvoip.org" <arm-allstar at hamvoip.org>
> Subject: [arm-allstar] Allmon
> Message-ID: <BLU172-W437F806BEE2B65E9E06320BA050 at phx.gbl>
> Content-Type: text/plain; charset="iso-8859-1"
> 
> Can someone writeup the procedure to get Allmon running on the BBB? If
> it is just notes that is fine. I can refine it. I will put a howto on
> the web page.
> 73 Doug
> WA3DSP
> http://www.crompton.com/hamradio
>  		 	   		

Doug,

Here's what I did although I haven't looked at database read/write 
issue.


Download Allmon2 then GCC then libxml2.2.9.1-5-armv6h then 
php-cgi-5.5.14-1-armv6h

unxz the armv6h files then tar -xf the resultant files

Most folk will cd /tmp to do this but I found that after a reboot the 
/tmp folder was emptied so I used a folder created for downloads [ 
Downloads/BBB ] the next time to save more downloads.

The tar -xf creates folders within the Downloads/BBB folder so I just 
copied the contents of these folders to the same name folders already in 
Arch. eg: contents of Downloads/BBB/user to /usr..

Lighttpd uses /srv/http as the 'home' folder so I added my Allmon folder 
there.

I'm sure there's a better/easier/more professional way to do it but it 
worked for me..

Regards,

Ian..