[arm-allstar] Echolink Error
Doug Crompton
doug at crompton.com
Wed Aug 6 11:10:40 EST 2014
John,
Yes the port checking routines would only report TCP as UDP ports would give no response. It sounds crazy but one way you could check the ports is to turn off echolink - comment it out - and set your ssh port on the BBB to 5198 or 5199 and see if you can ssh in using those ports. That would test if they are blocked for some reason. You would have to forward TCP or both in your router though as ssh is TCP.
73 Doug
WA3DSP
http://www.crompton.com/hamradio
Date: Wed, 6 Aug 2014 09:05:49 -0500
From: wb5nfc at gmail.com
To: arm-allstar at hamvoip.org
Subject: Re: [arm-allstar] Echolink Error
Yes, Echolink was working via the hotspot with an IRLP/Echolink Raspberri Pi node. Node IP was DMZ'd rather than forwarding specific ports as I recall. That's what I'm going to try next. I've had problems with data-throttling nearly every month except this one. I think they finally have things worked out with Verizon. My monthly data cap is (much) higher through Millenicom than it would be directly through Verizon. It does complicate matters considerably when there is a problem.
Could you try this site to see if it properly reports open ports on your node?
http://www.yougetsignal.com/tools/open-ports/
When I run it on my external IP, it only reports TCP ports that are open - none of my UDP ports. Required ports (TCP and UDP) are all listed in port forwarding in my router config...
John
On Tue, Aug 5, 2014 at 11:02 PM, Doug Crompton <doug at crompton.com> wrote:
There was no echolink_permit.conf in the distribution and the permit/deny lines were commented out in the echolink.conf file. Unless you changed that it should not be the issue.
power=20
height=50
gain=6
dir=0
;deny=
;permit=
John,
Have you had echolink working with your current provider/router at your QTH with any platform?
73 Doug
WA3DSP
http://www.crompton.com/hamradio
Date: Tue, 5 Aug 2014 23:28:28 -0400
From: kp4tr.ramon at gmail.com
To: arm-allstar at hamvoip.org
Subject: Re: [arm-allstar] Echolink Error
Do you have a echolink_permit.conf file
in /etc/asterisk? Sounds as if you're denying all inbound
connections.
I tried to connect and seems I connect, then get kicked out.
Also check in echolink.conf if there is an entry that says:
deny = -l
or
deny =
Remove them.
See http://www.allstarnode.com/viewtopic.php?f=10&t=102
On 8/5/2014 8:20 PM, John wrote:
Still unable to connect to Echolink nodes nor can they
connect to me. My node shows up on Echolink station list, but
stations time out without connecting. I tried today from my
iPhone (LTE, not wireless connection). Echolink client says:
Connection failed. Cannot connect to WB5NFC-L. UNAUTHORIZED.
Double-checked port forwarding on the router. Beginning to
wonder if Verizon might be doing some port filtering. Anyone
else successfully using a wifi hotspot with VoIP?
John
Sent from my iPhone
On Aug 5, 2014, at 5:56 PM, Dave P <tdydave at gmail.com>
wrote:
Greetings All,
John recently got setup on the BBB using a Verizon
Hotspot 4Gig connection. He also has an echolink node
that I verified the configuration on the allstarlink web
page and the echolink.conf file are set. He opened up the
eanmode command on rpt.conf file.
John,
Please give us an update your echolink and allstar and
advise what is your current state to resolving echolink
issues and connections? Check out this website to view
AllmonII. www.hammradio.us go
to allstarlink page 1 and 2 and you will see Bob' ALLMONII
and our Hawaii Mainland network setup. This website will
give a good opportunity to gauge how we can monitor our
network.
I've included Bob W6REB on this thread if your
interested in learning about it.
Bob/Jim,
John is living in an RV and just installed the BBB
using Verizon 4G network. John is in Arkansas and I got
his client up and running. He doesn't have an RF link
yet, however, he wants to expand to get RF.
73 and aloha
Dave
On Mon, Aug 4, 2014 at 9:44 AM,
John <wb5nfc at gmail.com>
wrote:
Dave,
After we hung up last night, I remembered that I
was going to ask you more about Allmon. That's a
tool I definitely want in my toolbox! Perhaps next
time you have some spare time...
Once again, many thanks for all the help!
John / WB5NFC
On Sun, Aug 3, 2014 at 5:22 PM, Dave P
<tdydave at gmail.com>
wrote:
John,
Be glad to help. Do you have
teamviewer installed on your windows
computer and I can help you out.
Here is my phone number 703-794-2111
or give me a number to call and glad to be
of assistance.
73
Dave
---------- Forwarded message
----------
From: John
<wb5nfc at gmail.com>
Date: Sun, Aug 3, 2014 at 6:12 PM
Subject: [arm-allstar] Echolink
Error
To: BeagleBone Black ARM Allstar
<arm-allstar at hamvoip.org>
Getting closer to having a working
node thanks to the help of many on
this list and hams not directly
involved with the BBB (yet).
Outbound seems to be working OK,
but I still have kinks to work out
on incoming connections.
When an Echolink station
attempts to connect to my node,
they time out. On an iPhone, the
message is: Connect Failed.
Cannot connect to WB5NFC-L
UNAUTHORIZED. If I watch the CLI
during the incoming call
attempt, I see repeated
ERROR[410]: chan_echolink.c:2578
do_new_call: Cannot find DB
entry for IP addr 10.159.66.1.10.159.66.1 is the
internal IP of my router
rather than my external,
static IP.
Troubleshooting
suggestions?
John
--
John Kenney
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
--
John Kenney
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
--
John Kenney
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20140806/ccbd3029/attachment-0001.html>
More information about the arm-allstar
mailing list