[Arm-allstar-irlp] Brand new with Allstar Host name does not resolve outgoing ports not forwarded

[Glenn Maclean]

I am using https://hamvoip.org/RPi2/RPi2-3_V1.5rc50_Allstar.img.xz <https://hamvoip.org/RPi2/RPi2-3_V1.5rc50_Allstar.img.xz>
Downloaded from the Ham VOIP website. Still unable to get IRLP to work. The problem is in the PGP. I have used WSCP to transfer the searing.pgp file to the .pgp folder which does not list with the ls command and pop command does not work so there is something wrong with my set top but do not know where to look? The old raspberry pi computer works just fine with the IRLP board. I am using a brand new 3b+ raspberry pi for the Allstar set up

Glenn WA7SPY
> On May 26, 2019, at 6:06 AM, Darrell Wilkinson via ARM-allstar-irlp <arm-allstar-irlp at hamvoip.org> wrote:
> 
> Just for the asking which allstar .img are you using. The .img you download
> from the allstar website is a raspbian stretch linux , the .img you
> download from hamvoip is arch linux. The IRLP support is made for arch. Why
> I ask this is you said you logged in as repeater which is what you would be
> using if you where using the raspbian stretch linux. I would download a new
> .img from hamvoip follow the howto to install IRLP and I bet you could get
> it to work. On the other side of that coin I have tried building a bridge
> out of the raspbian stretch .img myself but so far no luck getting it to
> work right
> 
> On Thu, May 23, 2019 at 7:09 PM "Glenn Maclean via ARM-allstar-irlp" <
> arm-allstar-irlp at hamvoip.org <mailto:arm-allstar-irlp at hamvoip.org>> wrote:
> 
>> Hi,
>> I am very new to Allstar and just got my node up and running. I was able
>> to get Echolink to work without issue and Allstar node seems to be working.
>> When I run the IRLP troubleshooting script as user repeater I am getting
>> two errors.
>> 1. Ports 873, 8873,10000, 15425,15426,15427 do not work outbound
>> 
>> 2. Your node’s hostname does not resolve
>> 
>> I am using an ATT router with the raspberry pi IP address in the DMZ.
>> Using DHCP I had not issues what so ever with the original IRLP raspberry
>> pi with the IRLP board using the same router with the raspberry pi in the
>> DMZ using DHCP. There is no issue with the router, I have triple checked
>> the environment file and the call and IRLP node numbers are there in lower
>> case! The hosts file is also configured correctly. Here is my hosts file:
>> 
>> #
>> # /etc/hosts: static lookup table for host names
>> #<ip-address>           <hostname.domain.org <http://hostname.domain.org/> <http://hostname.domain.org/ <http://hostname.domain.org/>>>
>>           <hostname
>> 127.0.0.1               localhost
>> 127.0.0.1               localhost.localdomain   localhost
>> 127.0.0.1               config.allstarlinl.org <http://config.allstarlinl.org/> <
>> http://config.allstarlinl.org/ <http://config.allstarlinl.org/>>
>> 127.0.0.1               stn388
>> #: : 1
>> 
>> #End of file
>> 
>> Any help would be much appreciated!
>> 
>> Thank you,
>> Glenn Maclean WA7SPY
>> _______________________________________________
>> ARM-allstar-irlp mailing list
>> ARM-allstar-irlp at hamvoip.org <mailto:ARM-allstar-irlp at hamvoip.org>
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp <http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp>
>> 
> _______________________________________________
> ARM-allstar-irlp mailing list
> ARM-allstar-irlp at hamvoip.org <mailto:ARM-allstar-irlp at hamvoip.org>
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp <http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp>