[Arm-allstar-irlp] Fwd: Re: Problems connecting to IRLP reflectors

Paul - KN2R paulkn2r at gmail.com
Tue May 14 16:49:33 EDT 2019 

Hi Gerry,

After connecting and then disconnecting an IRLP node, you MUST wait at LEAST
20 or more seconds, in between, before you dial another IRLP node.  The
bridging channel driver requires time to fully complete and clear the
previous connection!

Paul / KN2R


-----Original Message-----
From: ARM-allstar-irlp [mailto:arm-allstar-irlp-bounces at hamvoip.org] On
Behalf Of "Gerry Filby via ARM-allstar-irlp"
Sent: Tuesday, May 14, 2019 4:30 PM
To: arm-allstar-irlp at hamvoip.org
Cc: Gerry Filby
Subject: [Arm-allstar-irlp] Fwd: Re: Problems connecting to IRLP reflectors


Well I've been through it with a fine-toothed comb - I can't see 
anything wrong.

Also I can connect to 89999 and 80016 the experimental news station just 
fine - see the log below.

Times out on 9100, 9200 etc ...

Tonight I'll drag out the old IRLP hardware and see if that works.

g

Tue May 14 13:23:42 PDT 2019 [irlp_fullreset] Full Reset completed.
Tue May 14 13:23:42 PDT 2019 [experimental_call] The experimental node 
is using a hostname: newsline.thelinkbox.net
Tue May 14 13:23:42 PDT 2019 [experimental_call] The experimental node 
IP is determined to be 72.249.77.29
Tue May 14 13:23:42 PDT 2019 [experimental_call] Timeout is disabled.
Tue May 14 13:23:42 PDT 2019 [experimental_call] Node Connected to 
experimental node exp0016, CODEC=ADPCM_FD
Tue May 14 13:23:43 PDT 2019 [experimental_call] CODEC at this point is 
=ADPCM_FD=
Tue May 14 13:24:31 PDT 2019 [end] Node Disconnect from exp0016
Tue May 14 13:24:32 PDT 2019 [dropcall] Call dropped.
Tue May 14 13:24:49 PDT 2019 [irlp_fullreset] Full Reset completed.
Tue May 14 13:24:49 PDT 2019 [connect_to_reflector] Reflector 
ref920/Ch-0 CODEC chosen is UNCOMP.
Tue May 14 13:25:05 PDT 2019 [failure] timeout connect
Tue May 14 13:25:05 PDT 2019 [irlp_reset] Reset completed.

Pres W wrote on 5/14/19 11:58 AM:
> Gerry,
> 
> I understand you feel your ports are in order, but it's worth going 
> though BOTH Allstar and IRLP ports, paying particular attention to UDP 
> vs TCP selection. From memory: 2074-2093 UDP ; 15425-15527 TCP and the 
> usual Allstar ports 4569 UDP; and 5038 and 222 TCP (plus Echolink if 
> used). Routers do funny things now and then, including letting 
> previously reserved/locked devices wander. 73
> 
> Pres
> W2PW
> 
> On Tue, May 14, 2019, 2:22 PM "Gerry Filby via ARM-allstar-irlp" 
> <arm-allstar-irlp at hamvoip.org <mailto:arm-allstar-irlp at hamvoip.org>>
wrote:
> 
>     I don't use IRLP a whole lot, but just noticed that I can't connect to
>     any of the reflectors - the connection times out.
> 
>     I CAN connect to 89999 and the transmit and playback works fine.
> 
>     I've double checked the configuration per the how-to document and all
>     seems fine - including port forwarding at my firewall.
> 
>     It used to work and nothing has changed in many months.
> 
>     Below is the contents of the IRLP log if it's any help.
> 
>     My station # is stn3366.
> 
>     Any ideas ?
> 
>     Gerry
>     W6WNG
> 
> 
>     File: /home/irlp/log/messages
>     -----------------------------------------------------------------
>     Tue May 14 10:44:45 PDT 2019 [update:hosts] Gzipped file was
>     unavailable, downloading hosts.update direct.
>     Tue May 14 10:44:45 PDT 2019 [update:hosts] ERROR: Hosts file seems
>     invalid.
>     Tue May 14 10:44:45 PDT 2019 [update:hosts] Update completed.
>     Tue May 14 10:44:55 PDT 2019 [irlp_fullreset] Full Reset completed.
>     Tue May 14 10:44:56 PDT 2019 [irlp_fullreset] Full Reset completed.
>     Tue May 14 10:45:11 PDT 2019 [irlp_fullreset] Full Reset completed.
>     Tue May 14 10:45:11 PDT 2019 [connect_to_reflector] Reflector
>     ref910/Ch-9 CODEC chosen is UNCOMP.
>     Tue May 14 10:45:13 PDT 2019 [update:hosts] Update completed.
>     Tue May 14 10:45:49 PDT 2019 [failure] timeout connect
>     Tue May 14 10:45:50 PDT 2019 [irlp_reset] Reset completed.
>     Tue May 14 10:46:12 PDT 2019 [irlp_fullreset] Full Reset completed.
>     Tue May 14 10:46:12 PDT 2019 [connect_to_reflector] Reflector
>     ref922/Ch-9 CODEC chosen is GSM.
>     Tue May 14 10:46:28 PDT 2019 [failure] timeout connect
>     Tue May 14 10:46:28 PDT 2019 [irlp_reset] Reset completed.
>     Tue May 14 10:47:26 PDT 2019 [irlp_fullreset] Full Reset completed.
>     Tue May 14 10:47:26 PDT 2019 [connect_to_reflector] Reflector
>     ref910/Ch-0 CODEC chosen is UNCOMP.
>     Tue May 14 10:47:42 PDT 2019 [failure] timeout connect
>     Tue May 14 10:47:42 PDT 2019 [irlp_reset] Reset completed.
>     Tue May 14 10:48:57 PDT 2019 [irlp_fullreset] Full Reset completed.
>     Tue May 14 10:48:57 PDT 2019 [connect_to_reflector] Reflector
>     ref999/Ch-9 CODEC chosen is ADPCM.
>     Tue May 14 10:48:58 PDT 2019 [connect_to_reflector] Timeout is
disabled.
>     Tue May 14 10:48:58 PDT 2019 [connect_to_reflector] Node Connected to
>     base reflector ref999/Ch-9
>     Tue May 14 10:49:59 PDT 2019 [end] Node Disconnect from ref9999
>     Tue May 14 10:50:14 PDT 2019 [irlp_fullreset] Full Reset completed.
>     Tue May 14 10:50:14 PDT 2019 [connect_to_reflector] Reflector
>     ref910/Ch-0 CODEC chosen is UNCOMP.
>     Tue May 14 10:50:29 PDT 2019 [failure] timeout connect
>     Tue May 14 10:50:30 PDT 2019 [irlp_reset] Reset completed.
>     Tue May 14 11:12:29 PDT 2019 [irlp_fullreset] Full Reset completed.
>     Tue May 14 11:12:29 PDT 2019 [connect_to_reflector] Reflector
>     ref910/Ch-0 CODEC chosen is UNCOMP.
>     Tue May 14 11:12:45 PDT 2019 [failure] timeout connect
>     Tue May 14 11:12:45 PDT 2019 [irlp_reset] Reset completed.
>     Tue May 14 11:13:08 PDT 2019 [irlp_fullreset] Full Reset completed.
>     Tue May 14 11:13:08 PDT 2019 [connect_to_reflector] Reflector
>     ref910/Ch-9 CODEC chosen is UNCOMP.
>     Tue May 14 11:13:24 PDT 2019 [failure] timeout connect
>     Tue May 14 11:13:25 PDT 2019 [irlp_reset] Reset completed.
>     Tue May 14 11:14:30 PDT 2019 [irlp_fullreset] Full Reset completed.
>     Tue May 14 11:14:30 PDT 2019 [connect_to_reflector] Reflector
>     ref960/Ch-0 CODEC chosen is UNCOMP.
>     Tue May 14 11:14:46 PDT 2019 [failure] timeout connect
>     Tue May 14 11:14:46 PDT 2019 [irlp_reset] Reset completed.
>     _______________________________________________
>     ARM-allstar-irlp mailing list
>     ARM-allstar-irlp at hamvoip.org <mailto:ARM-allstar-irlp at hamvoip.org>
>     http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
> 
_______________________________________________
ARM-allstar-irlp mailing list
ARM-allstar-irlp at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp

More information about the ARM-allstar-irlp mailing list