[Arm-allstar-irlp] Fwd: Re: Problems connecting to IRLP reflectors

Tue May 14 16:29:39 EDT 2019

Well I've been through it with a fine-toothed comb - I can't see 
anything wrong.

Also I can connect to 89999 and 80016 the experimental news station just 
fine - see the log below.

Times out on 9100, 9200 etc ...

Tonight I'll drag out the old IRLP hardware and see if that works.

g

Tue May 14 13:23:42 PDT 2019 [irlp_fullreset] Full Reset completed.
Tue May 14 13:23:42 PDT 2019 [experimental_call] The experimental node 
is using a hostname: newsline.thelinkbox.net
Tue May 14 13:23:42 PDT 2019 [experimental_call] The experimental node 
IP is determined to be 72.249.77.29
Tue May 14 13:23:42 PDT 2019 [experimental_call] Timeout is disabled.
Tue May 14 13:23:42 PDT 2019 [experimental_call] Node Connected to 
experimental node exp0016, CODEC=ADPCM_FD
Tue May 14 13:23:43 PDT 2019 [experimental_call] CODEC at this point is 
=ADPCM_FD=
Tue May 14 13:24:31 PDT 2019 [end] Node Disconnect from exp0016
Tue May 14 13:24:32 PDT 2019 [dropcall] Call dropped.
Tue May 14 13:24:49 PDT 2019 [irlp_fullreset] Full Reset completed.
Tue May 14 13:24:49 PDT 2019 [connect_to_reflector] Reflector 
ref920/Ch-0 CODEC chosen is UNCOMP.
Tue May 14 13:25:05 PDT 2019 [failure] timeout connect
Tue May 14 13:25:05 PDT 2019 [irlp_reset] Reset completed.

Pres W wrote on 5/14/19 11:58 AM:
> Gerry,
> 
> I understand you feel your ports are in order, but it's worth going 
> though BOTH Allstar and IRLP ports, paying particular attention to UDP 
> vs TCP selection. From memory: 2074-2093 UDP ; 15425-15527 TCP and the 
> usual Allstar ports 4569 UDP; and 5038 and 222 TCP (plus Echolink if 
> used). Routers do funny things now and then, including letting 
> previously reserved/locked devices wander. 73
> 
> Pres
> W2PW
> 
> On Tue, May 14, 2019, 2:22 PM "Gerry Filby via ARM-allstar-irlp" 
> <arm-allstar-irlp at hamvoip.org <mailto:arm-allstar-irlp at hamvoip.org>> wrote:
> 
>     I don't use IRLP a whole lot, but just noticed that I can't connect to
>     any of the reflectors - the connection times out.
> 
>     I CAN connect to 89999 and the transmit and playback works fine.
> 
>     I've double checked the configuration per the how-to document and all
>     seems fine - including port forwarding at my firewall.
> 
>     It used to work and nothing has changed in many months.
> 
>     Below is the contents of the IRLP log if it's any help.
> 
>     My station # is stn3366.
> 
>     Any ideas ?
> 
>     Gerry
>     W6WNG
> 
> 
>     File: /home/irlp/log/messages
>     -----------------------------------------------------------------
>     Tue May 14 10:44:45 PDT 2019 [update:hosts] Gzipped file was
>     unavailable, downloading hosts.update direct.
>     Tue May 14 10:44:45 PDT 2019 [update:hosts] ERROR: Hosts file seems
>     invalid.
>     Tue May 14 10:44:45 PDT 2019 [update:hosts] Update completed.
>     Tue May 14 10:44:55 PDT 2019 [irlp_fullreset] Full Reset completed.
>     Tue May 14 10:44:56 PDT 2019 [irlp_fullreset] Full Reset completed.
>     Tue May 14 10:45:11 PDT 2019 [irlp_fullreset] Full Reset completed.
>     Tue May 14 10:45:11 PDT 2019 [connect_to_reflector] Reflector
>     ref910/Ch-9 CODEC chosen is UNCOMP.
>     Tue May 14 10:45:13 PDT 2019 [update:hosts] Update completed.
>     Tue May 14 10:45:49 PDT 2019 [failure] timeout connect
>     Tue May 14 10:45:50 PDT 2019 [irlp_reset] Reset completed.
>     Tue May 14 10:46:12 PDT 2019 [irlp_fullreset] Full Reset completed.
>     Tue May 14 10:46:12 PDT 2019 [connect_to_reflector] Reflector
>     ref922/Ch-9 CODEC chosen is GSM.
>     Tue May 14 10:46:28 PDT 2019 [failure] timeout connect
>     Tue May 14 10:46:28 PDT 2019 [irlp_reset] Reset completed.
>     Tue May 14 10:47:26 PDT 2019 [irlp_fullreset] Full Reset completed.
>     Tue May 14 10:47:26 PDT 2019 [connect_to_reflector] Reflector
>     ref910/Ch-0 CODEC chosen is UNCOMP.
>     Tue May 14 10:47:42 PDT 2019 [failure] timeout connect
>     Tue May 14 10:47:42 PDT 2019 [irlp_reset] Reset completed.
>     Tue May 14 10:48:57 PDT 2019 [irlp_fullreset] Full Reset completed.
>     Tue May 14 10:48:57 PDT 2019 [connect_to_reflector] Reflector
>     ref999/Ch-9 CODEC chosen is ADPCM.
>     Tue May 14 10:48:58 PDT 2019 [connect_to_reflector] Timeout is disabled.
>     Tue May 14 10:48:58 PDT 2019 [connect_to_reflector] Node Connected to
>     base reflector ref999/Ch-9
>     Tue May 14 10:49:59 PDT 2019 [end] Node Disconnect from ref9999
>     Tue May 14 10:50:14 PDT 2019 [irlp_fullreset] Full Reset completed.
>     Tue May 14 10:50:14 PDT 2019 [connect_to_reflector] Reflector
>     ref910/Ch-0 CODEC chosen is UNCOMP.
>     Tue May 14 10:50:29 PDT 2019 [failure] timeout connect
>     Tue May 14 10:50:30 PDT 2019 [irlp_reset] Reset completed.
>     Tue May 14 11:12:29 PDT 2019 [irlp_fullreset] Full Reset completed.
>     Tue May 14 11:12:29 PDT 2019 [connect_to_reflector] Reflector
>     ref910/Ch-0 CODEC chosen is UNCOMP.
>     Tue May 14 11:12:45 PDT 2019 [failure] timeout connect
>     Tue May 14 11:12:45 PDT 2019 [irlp_reset] Reset completed.
>     Tue May 14 11:13:08 PDT 2019 [irlp_fullreset] Full Reset completed.
>     Tue May 14 11:13:08 PDT 2019 [connect_to_reflector] Reflector
>     ref910/Ch-9 CODEC chosen is UNCOMP.
>     Tue May 14 11:13:24 PDT 2019 [failure] timeout connect
>     Tue May 14 11:13:25 PDT 2019 [irlp_reset] Reset completed.
>     Tue May 14 11:14:30 PDT 2019 [irlp_fullreset] Full Reset completed.
>     Tue May 14 11:14:30 PDT 2019 [connect_to_reflector] Reflector
>     ref960/Ch-0 CODEC chosen is UNCOMP.
>     Tue May 14 11:14:46 PDT 2019 [failure] timeout connect
>     Tue May 14 11:14:46 PDT 2019 [irlp_reset] Reset completed.
>     _______________________________________________
>     ARM-allstar-irlp mailing list
>     ARM-allstar-irlp at hamvoip.org <mailto:ARM-allstar-irlp at hamvoip.org>
>     http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
> 