[Arm-allstar-irlp] Connection failures

Tue Apr 10 22:37:44 EST 2018

Since Ron sold his last irlp node now he doesn't have the key's to build a
tristar. If im not wrong the only way he can get new keys is to build a
stand alone irlp node then take what he needs out of that to make his
tristar. And he is not attempting to build a irlp node from hamvoip i gave
him jessie to build it on

On Tue, Apr 10, 2018, 10:30 PM Doug Crompton <wa3dsp at gmail.com> wrote:

> If Ron is building a new debian server to get a key he would have to
> shutoff the port forwarding to the hamvoip server if he set that up and
> then create that same forwarding to the debian server. Then get the key,
> transfer it to the hamvoip server and reverse the port forwarding back to
> the hamvoip server.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Tue, Apr 10, 2018 at 11:19 PM, Darrell Wilkinson <kc5czx at gmail.com>
> wrote:
>
>> I must admit its been awhile since I made a irlp node that way but if
>> memory serves you should have had the node# by the end of the install. Now
>> should be the time for that node# to populate the server and become active.
>> Currently I have no want or need to build up another irlp node to find out
>> what or where something went wrong. If you have your port forwarding set
>> right being behind a router should not make a difference and im guessing
>> just wait to see what node# you get. Other then that you may need to run it
>> again if no new node# is assigned. Something somewhere in the install went
>> wrong.
>>
>> On Apr 10, 2018 9:50 PM, "Ronald Foster" <rf37797 at gmail.com> wrote:
>>
>> So far, so good. I submitted the installs email with my IP address, root
>> password, and NEW node request.
>>
>> I’m concerned that since my Pi and software are behind my router, the
>> only address I could logically give them was that of my routers to the
>> network. I don’t see how they would be capable of installing any key.
>>
>> I haven’t a clue what they really need to get into my Pi, which is behind
>> my router with an in-house address of 192.168.1.21.
>>
>> You know what I need to supple them?
>>
>> Thank you for you help and concern.
>>
>> Ron
>>
>> On Apr 10, 2018, at 9:11 PM, Darrell Wilkinson <kc5czx at gmail.com> wrote:
>>
>> Well Ron how did your node project come out I hope it worked for you as
>> well as it worked for me
>>
>> On Tue, Apr 10, 2018, 1:56 PM Darrell Wilkinson <kc5czx at gmail.com> wrote:
>>
>>> Very good i've made a few irlp node using the full desktop version so I
>>> know it should work for you to
>>>
>>> On Tue, Apr 10, 2018, 1:50 PM Ronald Foster <rf37797 at gmail.com> wrote:
>>>
>>>> Thank you so very much! I’m downloading it now.
>>>>
>>>> 73
>>>>
>>>> Ron, K0AAJ
>>>>
>>>> On Apr 10, 2018, at 12:47 PM, Darrell Wilkinson <kc5czx at gmail.com>
>>>> wrote:
>>>>
>>>> Ron I have a copy of Jessie full desktop you can do the same thing on
>>>> it just don''t delete the pi user, I have copied it off to one of my nodes
>>>> and you can download it from there. Use WinSCP to login to this ip username
>>>> is root password is wilky123 ssh 222 and you will find it in the /root
>>>> directory it is at the bottom of the list
>>>>
>>>> 99.98.90.235
>>>>
>>>> On Tue, Apr 10, 2018 at 11:06 AM, Ronald Foster <rf37797 at gmail.com>
>>>> wrote:
>>>>
>>>>> Thanks Darrell.
>>>>>
>>>>> Unfortunately, I cannot find a download of the Debian Jessie Lite. The
>>>>> setup instructions would not allow me to complete the IRLP download setup.
>>>>>
>>>>> I guess I’ll buy the software IRPL pre-load on a SD card.
>>>>>
>>>>> Thanks.
>>>>>
>>>>> On Apr 10, 2018, at 8:21 AM, Darrell Wilkinson <kc5czx at gmail.com>
>>>>> wrote:
>>>>>
>>>>> Ron you don't need to buy another V3 board download a copy of raspbian
>>>>> lite then follow instruction given here
>>>>>
>>>>> http://www.irlp.net/pi/directions.txt
>>>>>
>>>>> I'm guessing you will need to make a New node so at the prompt type in
>>>>> NEW.
>>>>> During the install it will ask you purchase date and a few other
>>>>> questions in those type in USED all caps. After the install is finished
>>>>> give it a few to let the servers catch up to your new node# then make a
>>>>> backup from that. Once it shows on the irlp servers you just need to take
>>>>> out the files you need to build your TriStar. I have made several irlp
>>>>> nodes in this manor and none of them have I had a V3 board
>>>>>
>>>>>
>>>>> On Mon, Apr 9, 2018 at 9:30 AM, Ronald Foster <rf37797 at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Thanks for the reply. No, he has actually receive the node, so I’m
>>>>>> sure it has been used yet.
>>>>>>
>>>>>> What do you mean about not needing a IRLP V3 board to make a new
>>>>>> node? I was about to purchase new node from David at IRLP just to have a
>>>>>> new key issued.
>>>>>>
>>>>>> 73
>>>>>>
>>>>>> Ron
>>>>>>
>>>>>> On Apr 9, 2018, at 9:17 AM, Darrell Wilkinson <kc5czx at gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>> Do you know if the node you sold is being used, If so irlp will kick
>>>>>> out the second same node#. It might be easier if you made a new irlp node#
>>>>>> and use that. You don't need a irlp V3 board to make a new node# just type
>>>>>> in USED for purchase date and whatever else during install
>>>>>>
>>>>>> On Mon, Apr 9, 2018 at 9:06 AM, Ronald Foster <rf37797 at gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> I believe I have everything installed and configured for IRLP, but
>>>>>>> when I try to connect I always have a "connection failed" message.
>>>>>>>
>>>>>>> I do see the call attempting to link-up, but drops after a few
>>>>>>> seconds.
>>>>>>>
>>>>>>> I tried 2 nodes and 2 reflector and get the same message.
>>>>>>>
>>>>>>> Oddly, my 4386 node is displayed twice in the IRLP Summary, so I'm
>>>>>>> not sure if there is a problem with the IRLP network as it related to my
>>>>>>> node.
>>>>>>>
>>>>>>> I was hoping to get my server working properly today, since I sold
>>>>>>> my Nano Node and I'm using its key.
>>>>>>>
>>>>>>> I cannot continue to use the key after the new owner brings it
>>>>>>> online this evening.
>>>>>>>
>>>>>>> Any ideas?
>>>>>>>
>>>>>>> Ron, K0AAJ
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Arm-allstar-irlp mailing list
>>>>>>> Arm-allstar-irlp at hamvoip.org
>>>>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>>>>>>>
>>>>>>>
>>>>>> _______________________________________________
>>>>>> Arm-allstar-irlp mailing list
>>>>>> Arm-allstar-irlp at hamvoip.org
>>>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Arm-allstar-irlp mailing list
>>>>>> Arm-allstar-irlp at hamvoip.org
>>>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>>>>>>
>>>>>>
>>>>> _______________________________________________
>>>>> Arm-allstar-irlp mailing list
>>>>> Arm-allstar-irlp at hamvoip.org
>>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Arm-allstar-irlp mailing list
>>>>> Arm-allstar-irlp at hamvoip.org
>>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>>>>>
>>>>>
>>>> _______________________________________________
>>>> Arm-allstar-irlp mailing list
>>>> Arm-allstar-irlp at hamvoip.org
>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>>>>
>>>> _______________________________________________
>>>> Arm-allstar-irlp mailing list
>>>> Arm-allstar-irlp at hamvoip.org
>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>>>>
>>> _______________________________________________
>> Arm-allstar-irlp mailing list
>> Arm-allstar-irlp at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>>
>> _______________________________________________
>> Arm-allstar-irlp mailing list
>> Arm-allstar-irlp at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>>
>>
>>
>> _______________________________________________
>> Arm-allstar-irlp mailing list
>> Arm-allstar-irlp at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>>
>>
> _______________________________________________
> Arm-allstar-irlp mailing list
> Arm-allstar-irlp at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar-irlp/attachments/20180411/14ea4f78/attachment-0001.html>