[Arm-allstar-irlp] Connection failures

[Darrell Wilkinson]

Well Ron how did your node project come out I hope it worked for you as
well as it worked for me

On Tue, Apr 10, 2018, 1:56 PM Darrell Wilkinson <kc5czx at gmail.com> wrote:

> Very good i've made a few irlp node using the full desktop version so I
> know it should work for you to
>
> On Tue, Apr 10, 2018, 1:50 PM Ronald Foster <rf37797 at gmail.com> wrote:
>
>> Thank you so very much! I’m downloading it now.
>>
>> 73
>>
>> Ron, K0AAJ
>>
>> On Apr 10, 2018, at 12:47 PM, Darrell Wilkinson <kc5czx at gmail.com> wrote:
>>
>> Ron I have a copy of Jessie full desktop you can do the same thing on it
>> just don''t delete the pi user, I have copied it off to one of my nodes and
>> you can download it from there. Use WinSCP to login to this ip username is
>> root password is wilky123 ssh 222 and you will find it in the /root
>> directory it is at the bottom of the list
>>
>> 99.98.90.235
>>
>> On Tue, Apr 10, 2018 at 11:06 AM, Ronald Foster <rf37797 at gmail.com>
>> wrote:
>>
>>> Thanks Darrell.
>>>
>>> Unfortunately, I cannot find a download of the Debian Jessie Lite. The
>>> setup instructions would not allow me to complete the IRLP download setup.
>>>
>>> I guess I’ll buy the software IRPL pre-load on a SD card.
>>>
>>> Thanks.
>>>
>>> On Apr 10, 2018, at 8:21 AM, Darrell Wilkinson <kc5czx at gmail.com> wrote:
>>>
>>> Ron you don't need to buy another V3 board download a copy of raspbian
>>> lite then follow instruction given here
>>>
>>> http://www.irlp.net/pi/directions.txt
>>>
>>> I'm guessing you will need to make a New node so at the prompt type in
>>> NEW.
>>> During the install it will ask you purchase date and a few other
>>> questions in those type in USED all caps. After the install is finished
>>> give it a few to let the servers catch up to your new node# then make a
>>> backup from that. Once it shows on the irlp servers you just need to take
>>> out the files you need to build your TriStar. I have made several irlp
>>> nodes in this manor and none of them have I had a V3 board
>>>
>>>
>>> On Mon, Apr 9, 2018 at 9:30 AM, Ronald Foster <rf37797 at gmail.com> wrote:
>>>
>>>> Thanks for the reply. No, he has actually receive the node, so I’m sure
>>>> it has been used yet.
>>>>
>>>> What do you mean about not needing a IRLP V3 board to make a new node?
>>>> I was about to purchase new node from David at IRLP just to have a new key
>>>> issued.
>>>>
>>>> 73
>>>>
>>>> Ron
>>>>
>>>> On Apr 9, 2018, at 9:17 AM, Darrell Wilkinson <kc5czx at gmail.com> wrote:
>>>>
>>>> Do you know if the node you sold is being used, If so irlp will kick
>>>> out the second same node#. It might be easier if you made a new irlp node#
>>>> and use that. You don't need a irlp V3 board to make a new node# just type
>>>> in USED for purchase date and whatever else during install
>>>>
>>>> On Mon, Apr 9, 2018 at 9:06 AM, Ronald Foster <rf37797 at gmail.com>
>>>> wrote:
>>>>
>>>>> I believe I have everything installed and configured for IRLP, but
>>>>> when I try to connect I always have a "connection failed" message.
>>>>>
>>>>> I do see the call attempting to link-up, but drops after a few seconds.
>>>>>
>>>>> I tried 2 nodes and 2 reflector and get the same message.
>>>>>
>>>>> Oddly, my 4386 node is displayed twice in the IRLP Summary, so I'm not
>>>>> sure if there is a problem with the IRLP network as it related to my node.
>>>>>
>>>>> I was hoping to get my server working properly today, since I sold my
>>>>> Nano Node and I'm using its key.
>>>>>
>>>>> I cannot continue to use the key after the new owner brings it online
>>>>> this evening.
>>>>>
>>>>> Any ideas?
>>>>>
>>>>> Ron, K0AAJ
>>>>>
>>>>> _______________________________________________
>>>>> Arm-allstar-irlp mailing list
>>>>> Arm-allstar-irlp at hamvoip.org
>>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>>>>>
>>>>>
>>>> _______________________________________________
>>>> Arm-allstar-irlp mailing list
>>>> Arm-allstar-irlp at hamvoip.org
>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>>>>
>>>>
>>>> _______________________________________________
>>>> Arm-allstar-irlp mailing list
>>>> Arm-allstar-irlp at hamvoip.org
>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>>>>
>>>>
>>> _______________________________________________
>>> Arm-allstar-irlp mailing list
>>> Arm-allstar-irlp at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>>>
>>>
>>> _______________________________________________
>>> Arm-allstar-irlp mailing list
>>> Arm-allstar-irlp at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>>>
>>>
>> _______________________________________________
>> Arm-allstar-irlp mailing list
>> Arm-allstar-irlp at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>>
>> _______________________________________________
>> Arm-allstar-irlp mailing list
>> Arm-allstar-irlp at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar-irlp/attachments/20180411/216e2d46/attachment-0001.html>