[Arm-allstar-irlp] Connection failures

[Darrell Wilkinson]

Very good i've made a few irlp node using the full desktop version so I
know it should work for you to

On Tue, Apr 10, 2018, 1:50 PM Ronald Foster <rf37797 at gmail.com> wrote:

> Thank you so very much! I’m downloading it now.
>
> 73
>
> Ron, K0AAJ
>
> On Apr 10, 2018, at 12:47 PM, Darrell Wilkinson <kc5czx at gmail.com> wrote:
>
> Ron I have a copy of Jessie full desktop you can do the same thing on it
> just don''t delete the pi user, I have copied it off to one of my nodes and
> you can download it from there. Use WinSCP to login to this ip username is
> root password is wilky123 ssh 222 and you will find it in the /root
> directory it is at the bottom of the list
>
> 99.98.90.235
>
> On Tue, Apr 10, 2018 at 11:06 AM, Ronald Foster <rf37797 at gmail.com> wrote:
>
>> Thanks Darrell.
>>
>> Unfortunately, I cannot find a download of the Debian Jessie Lite. The
>> setup instructions would not allow me to complete the IRLP download setup.
>>
>> I guess I’ll buy the software IRPL pre-load on a SD card.
>>
>> Thanks.
>>
>> On Apr 10, 2018, at 8:21 AM, Darrell Wilkinson <kc5czx at gmail.com> wrote:
>>
>> Ron you don't need to buy another V3 board download a copy of raspbian
>> lite then follow instruction given here
>>
>> http://www.irlp.net/pi/directions.txt
>>
>> I'm guessing you will need to make a New node so at the prompt type in
>> NEW.
>> During the install it will ask you purchase date and a few other
>> questions in those type in USED all caps. After the install is finished
>> give it a few to let the servers catch up to your new node# then make a
>> backup from that. Once it shows on the irlp servers you just need to take
>> out the files you need to build your TriStar. I have made several irlp
>> nodes in this manor and none of them have I had a V3 board
>>
>>
>> On Mon, Apr 9, 2018 at 9:30 AM, Ronald Foster <rf37797 at gmail.com> wrote:
>>
>>> Thanks for the reply. No, he has actually receive the node, so I’m sure
>>> it has been used yet.
>>>
>>> What do you mean about not needing a IRLP V3 board to make a new node? I
>>> was about to purchase new node from David at IRLP just to have a new key
>>> issued.
>>>
>>> 73
>>>
>>> Ron
>>>
>>> On Apr 9, 2018, at 9:17 AM, Darrell Wilkinson <kc5czx at gmail.com> wrote:
>>>
>>> Do you know if the node you sold is being used, If so irlp will kick out
>>> the second same node#. It might be easier if you made a new irlp node# and
>>> use that. You don't need a irlp V3 board to make a new node# just type in
>>> USED for purchase date and whatever else during install
>>>
>>> On Mon, Apr 9, 2018 at 9:06 AM, Ronald Foster <rf37797 at gmail.com> wrote:
>>>
>>>> I believe I have everything installed and configured for IRLP, but when
>>>> I try to connect I always have a "connection failed" message.
>>>>
>>>> I do see the call attempting to link-up, but drops after a few seconds.
>>>>
>>>> I tried 2 nodes and 2 reflector and get the same message.
>>>>
>>>> Oddly, my 4386 node is displayed twice in the IRLP Summary, so I'm not
>>>> sure if there is a problem with the IRLP network as it related to my node.
>>>>
>>>> I was hoping to get my server working properly today, since I sold my
>>>> Nano Node and I'm using its key.
>>>>
>>>> I cannot continue to use the key after the new owner brings it online
>>>> this evening.
>>>>
>>>> Any ideas?
>>>>
>>>> Ron, K0AAJ
>>>>
>>>> _______________________________________________
>>>> Arm-allstar-irlp mailing list
>>>> Arm-allstar-irlp at hamvoip.org
>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>>>>
>>>>
>>> _______________________________________________
>>> Arm-allstar-irlp mailing list
>>> Arm-allstar-irlp at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>>>
>>>
>>> _______________________________________________
>>> Arm-allstar-irlp mailing list
>>> Arm-allstar-irlp at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>>>
>>>
>> _______________________________________________
>> Arm-allstar-irlp mailing list
>> Arm-allstar-irlp at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>>
>>
>> _______________________________________________
>> Arm-allstar-irlp mailing list
>> Arm-allstar-irlp at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>>
>>
> _______________________________________________
> Arm-allstar-irlp mailing list
> Arm-allstar-irlp at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>
> _______________________________________________
> Arm-allstar-irlp mailing list
> Arm-allstar-irlp at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar-irlp/attachments/20180410/cbe821e0/attachment.html>