[Arm-allstar-irlp] Connection failures

[Ronald Foster]

Thanks Darrell.

Unfortunately, I cannot find a download of the Debian Jessie Lite. The setup instructions would not allow me to complete the IRLP download setup.

I guess I’ll buy the software IRPL pre-load on a SD card.

Thanks.

> On Apr 10, 2018, at 8:21 AM, Darrell Wilkinson <kc5czx at gmail.com> wrote:
> 
> Ron you don't need to buy another V3 board download a copy of raspbian lite then follow instruction given here
> 
> http://www.irlp.net/pi/directions.txt
> 
> I'm guessing you will need to make a New node so at the prompt type in NEW.
> During the install it will ask you purchase date and a few other questions in those type in USED all caps. After the install is finished give it a few to let the servers catch up to your new node# then make a backup from that. Once it shows on the irlp servers you just need to take out the files you need to build your TriStar. I have made several irlp nodes in this manor and none of them have I had a V3 board 
> 
> 
>> On Mon, Apr 9, 2018 at 9:30 AM, Ronald Foster <rf37797 at gmail.com> wrote:
>> Thanks for the reply. No, he has actually receive the node, so I’m sure it has been used yet.
>> 
>> What do you mean about not needing a IRLP V3 board to make a new node? I was about to purchase new node from David at IRLP just to have a new key issued.
>> 
>> 73
>> 
>> Ron
>> 
>>> On Apr 9, 2018, at 9:17 AM, Darrell Wilkinson <kc5czx at gmail.com> wrote:
>>> 
>>> Do you know if the node you sold is being used, If so irlp will kick out the second same node#. It might be easier if you made a new irlp node# and use that. You don't need a irlp V3 board to make a new node# just type in USED for purchase date and whatever else during install
>>> 
>>>> On Mon, Apr 9, 2018 at 9:06 AM, Ronald Foster <rf37797 at gmail.com> wrote:
>>>> I believe I have everything installed and configured for IRLP, but when I try to connect I always have a "connection failed" message.
>>>> 
>>>> I do see the call attempting to link-up, but drops after a few seconds.
>>>> 
>>>> I tried 2 nodes and 2 reflector and get the same message.
>>>> 
>>>> Oddly, my 4386 node is displayed twice in the IRLP Summary, so I'm not sure if there is a problem with the IRLP network as it related to my node.
>>>> 
>>>> I was hoping to get my server working properly today, since I sold my Nano Node and I'm using its key.
>>>> 
>>>> I cannot continue to use the key after the new owner brings it online this evening.
>>>> 
>>>> Any ideas?
>>>> 
>>>> Ron, K0AAJ
>>>> 
>>>> _______________________________________________
>>>> Arm-allstar-irlp mailing list
>>>> Arm-allstar-irlp at hamvoip.org
>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>>>> 
>>> 
>>> _______________________________________________
>>> Arm-allstar-irlp mailing list
>>> Arm-allstar-irlp at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>> 
>> _______________________________________________
>> Arm-allstar-irlp mailing list
>> Arm-allstar-irlp at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>> 
> 
> _______________________________________________
> Arm-allstar-irlp mailing list
> Arm-allstar-irlp at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar-irlp/attachments/20180410/54750d46/attachment-0001.html>