[Arm-allstar-irlp] Howto

[Doug Crompton]

Justin,

  Not sure what the problem could be as we have not seen that issue. Have
you done all the proper port forwarding to that box? Followed all the setup
instructions? Let us know if you get it resolved.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*



On Tue, Apr 3, 2018 at 7:57 PM, Justin Reed <celltech161 at yahoo.com> wrote:

> Doug,
>
> I performed the steps and rebooted, and the IRLP status page is updating
> correctly. However, I cannot stay connected to the echo reflector or any
> other node/reflector for more than a few seconds. It acts like the
> authentication isn't working.
>
> I did copy /home/irlp/.pgp/secring.pgp from my actual IRLP installation
> over to the Allstar Pi, but I left the pubring.pgp symlink in place because
> the instructions didn't specify what to do - only that the symlink is there.
>
> I also took the "real" IRLP PC offline and rebooted the Allstar node.
> Still not holding a connection.
>
> Am I missing something with the PGP authentication?
> Justin
> NV8Q
>
>
> On Tuesday, April 3, 2018, 4:20:58 PM CDT, Doug Crompton <wa3dsp at gmail.com>
> wrote:
>
>
> I am attaching the hotwo again with a few slight changes. More detail on
> copying your key and a note that when configuration is complete you should
> reboot your server.
>
> Please give us input on how your configuration is going!
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/ hamradio <http://www.crompton.com/hamradio>*
>
> _______________________________________________
> Arm-allstar-irlp mailing list
> Arm-allstar-irlp at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar-irlp/attachments/20180403/fb397eaf/attachment.html>