[Arm-allstar-irlp] IRLP Beta is HERE!

[Doug Crompton]

Greg,

 BTW, anyone that is using the beta should be art of this list so either
have them join or send their email along to me so I can add them. All info
on IRLP will be discussed on this list so it is important they are part of
it.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*



On Tue, Apr 3, 2018 at 8:15 AM, <thorn at myactv.net> wrote:

>
>
>
>
>
>
>
>
> *--- wa3dsp at gmail.com <wa3dsp at gmail.com> wrote:From: Doug Crompton
> <wa3dsp at gmail.com <wa3dsp at gmail.com>>To: arm-allstar-irlp at hamvoip.org
> <arm-allstar-irlp at hamvoip.org>Subject: [Arm-allstar-irlp] IRLP Beta is
> HERE!Date: Tue, 3 Apr 2018 01:49:55 -0400*
>
> *If you are using this on a busy hub/gateway we would recommend using a
> Pi3 in turbo mode which means you would need to use a heatsink and small
> fan on the CPU. You can monitor the CPU temperature using the cpu_status.sh
> script. With proper cooling it should remain in the 40-50 degree C region.
> The cpu_turbo.sh script sets or resets turbo mode.*
>
>
> Would it work OK without turbo mode if you had this on a separate Pi that
> connects to a busy hub?
> It would be nice to have a x86 version. I got DIAL running on a cheap vm
> in AZ as a hub and it works well. So if my power or internet goes out
> (which it did the last wind storm)  the hub is fine.
>
> I sent the howto to a couple of hams that have reflectors that are not on
> the lists that have time to test it and would like to switch over since
> they are using the old version from 2010.
>
> I'm stopping by Microcenter on the way home from PAX River tomorrow night
> to pick up a couple of new Pi 3 B's ($29). So, the Pi 3 B are 4Ghz in turbo
> mode eh?
>
> tnx, 73 Greg
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar-irlp/attachments/20180403/7b819579/attachment.html>