<div dir="ltr">Hi all,<div><br></div><div>Yes, it was power. The USB cables looked good, so I removed the battery eliminator and moved to the charged battery supplied with the order. Working fine on battery. </div><div><br>I tried to use 3 different USB power sources... (2 other power sources, 1 2A and the Pi3 itself.) None worked on the eliminator but the battery has not failed with 30 mins of run time on it so far.</div><div><br></div><div>Bryan</div><div><br></div></div><div class="gmail_extra"><br><div class="gmail_quote">On Fri, Sep 16, 2016 at 10:29 PM, Devan Phillis via arm-allstar <span dir="ltr"><<a href="mailto:arm-allstar@hamvoip.org" target="_blank">arm-allstar@hamvoip.org</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><p dir="ltr">Doug, that is one of my fobs..... tested to be working when i shipped. I have seen this happen a couple times and i have found that most of the time it has to do with power to the radio for some reason. When there isnt enough power supplied to the radio it resets and makes the pi think the fob was unplugged an plugged back in. Bryan, did you order a standard battery as well as the eliminator? If so try charging the battery and using it for starters. If not then try to find a usb power supply that supplies 2A and use it. If the problem continues then i will be glad to refund you your money or replace the radio and fob for another. </p>
<p dir="ltr">Devan KD8MST</p>
<div class="gmail_extra"><br><div class="gmail_quote">On Sep 17, 2016 1:20 AM, <<a href="mailto:arm-allstar-request@hamvoip.org" target="_blank">arm-allstar-request@hamvoip.<wbr>org</a>> wrote:<br type="attribution"><blockquote style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Send arm-allstar mailing list submissions to<br>
<a href="mailto:arm-allstar@hamvoip.org" target="_blank">arm-allstar@hamvoip.org</a><br>
<br>
To subscribe or unsubscribe via the World Wide Web, visit<br>
<a href="http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar" rel="noreferrer" target="_blank">http://lists.hamvoip.org/cgi-b<wbr>in/mailman/listinfo/arm-allsta<wbr>r</a><br>
or, via email, send a message with subject or body 'help' to<br>
<a href="mailto:arm-allstar-request@hamvoip.org" target="_blank">arm-allstar-request@hamvoip.or<wbr>g</a><br>
<br>
You can reach the person managing the list at<br>
<a href="mailto:arm-allstar-owner@hamvoip.org" target="_blank">arm-allstar-owner@hamvoip.org</a><br>
<br>
When replying, please edit your Subject line so it is more specific<br>
than "Re: Contents of arm-allstar digest..."<br>
<br>
<br>
Today's Topics:<br>
<br>
1. USB reset issue (Bryan St Clair)<br>
2. Re: USB reset issue (Roselito de los Reyes)<br>
3. Re: USB reset issue (Doug Crompton)<br>
<br>
<br>
------------------------------<wbr>------------------------------<wbr>----------<br>
<br>
Message: 1<br>
Date: Fri, 16 Sep 2016 21:30:34 -0700<br>
From: Bryan St Clair <<a href="mailto:bryan@k6cbr.us" target="_blank">bryan@k6cbr.us</a>><br>
To: ARM Allstar <<a href="mailto:arm-allstar@hamvoip.org" target="_blank">arm-allstar@hamvoip.org</a>><br>
Subject: [arm-allstar] USB reset issue<br>
Message-ID:<br>
<<a href="mailto:CAH5oE6az3Lkc3Qo2ruLosVmVSGfJ1L6fb7C6xD-TmzxSuEdGUg@mail.gmail.com" target="_blank">CAH5oE6az3Lkc3Qo2ruLosVmVSGfJ<wbr>1L6fb7C6xD-TmzxSuEdGUg@mail.gm<wbr>ail.com</a>><br>
Content-Type: text/plain; charset="utf-8"<br>
<br>
Hello all,<br>
<br>
I have a new node up and am using an 888 with modified FOB.<br>
<br>
Just received the radio and have it online tonight, but notice after about<br>
20 mins of use, I was missing parts of the conversation.<br>
<br>
Radio stayed online and not was solid....not packet loss. When I logged<br>
into the console to see what was happening, I saw this:<br>
<br>
[Sep 16 21:20:58] WARNING[1457]: chan_simpleusb.c:2903 simpleusb_read:<br>
Possibly stuck USB read channel. [usb]<br>
<br>
== Set device 1-1.4:1.0 to usb<br>
<br>
[Sep 16 21:20:59] WARNING[1459]: chan_simpleusb.c:1670 hidthread: Loaded<br>
parameters from simpleusb_tune_usb.conf for device usb .<br>
<br>
[Sep 16 21:20:59] WARNING[1457]: chan_simpleusb.c:2903 simpleusb_read:<br>
Possibly stuck USB read channel. [usb]<br>
<br>
[Sep 16 21:20:59] WARNING[1457]: chan_simpleusb.c:2911 simpleusb_read:<br>
Nope, USB read channel [usb] wasn't stuck after all.<br>
<br>
-- Hungup 'DAHDI/pseudo-203191'<br>
<br>
-- Hungup 'DAHDI/pseudo-141004'<br>
<br>
-- Hungup 'DAHDI/pseudo-534356'<br>
<br>
== Set device 1-1.4:1.0 to usb<br>
<br>
[Sep 16 21:21:12] WARNING[1459]: chan_simpleusb.c:1670 hidthread: Loaded<br>
parameters from simpleusb_tune_usb.conf for device usb .<br>
<br>
[Sep 16 21:21:12] WARNING[1457]: chan_simpleusb.c:2903 simpleusb_read:<br>
Possibly stuck USB read channel. [usb]<br>
<br>
[Sep 16 21:21:13] WARNING[1457]: chan_simpleusb.c:2911 simpleusb_read:<br>
Nope, USB read channel [usb] wasn't stuck after all.<br>
<br>
-- Hungup 'DAHDI/pseudo-429511028'<br>
<br>
<br>
I get about 10 seconds of sound then a usb reset. Repeating messages.<br>
<br>
I have performed another usb config, to check settings.. but same result.<br>
<br>
I can hear the node and I can transmit clearly when connected.<br>
<br>
(If I should be asking for help on a different list for this type of issue,<br>
please inform me of that list name, thank you.)<br>
<br>
--<br>
Bryan aka K6CBR<br>
<a href="http://www.k6cbr.us" rel="noreferrer" target="_blank">www.k6cbr.us</a><br>
QRZ <<a href="http://www.qrz.com/db/K6CBR" rel="noreferrer" target="_blank">http://www.qrz.com/db/K6CBR</a>><br>
43913<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href="http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160916/46a33ca9/attachment-0001.html" rel="noreferrer" target="_blank">http://lists.hamvoip.org/pipe<wbr>rmail/arm-allstar/attachments/<wbr>20160916/46a33ca9/attachment-<wbr>0001.html</a>><br>
<br>
------------------------------<br>
<br>
Message: 2<br>
Date: Sat, 17 Sep 2016 04:42:19 +0000<br>
From: Roselito de los Reyes <<a href="mailto:tolitski@hotmail.com" target="_blank">tolitski@hotmail.com</a>><br>
To: ARM Allstar <<a href="mailto:arm-allstar@hamvoip.org" target="_blank">arm-allstar@hamvoip.org</a>><br>
Subject: Re: [arm-allstar] USB reset issue<br>
Message-ID:<br>
<<a href="mailto:BY1PR02MB1259745DBB8D471E6BBDAA59D4F20@BY1PR02MB1259.namprd02.prod.outlook.com" target="_blank">BY1PR02MB1259745DBB8D471E6BBD<wbr>AA59D4F20@BY1PR02MB1259.namprd<wbr>02.prod.outlook.com</a>><br>
<br>
Content-Type: text/plain; charset="us-ascii"<br>
<br>
Looks like your USB cable or USb connection between the URI and into the Pi is loose.<br>
<br>
Best regards,<br>
<br>
Roselito De Los Reyes<br>
<br>
<br>
On Sep 16, 2016, at 9:31 PM, Bryan St Clair via arm-allstar <<a href="mailto:arm-allstar@hamvoip.org" target="_blank">arm-allstar@hamvoip.org</a><mailt<wbr>o:<a href="mailto:arm-allstar@hamvoip.org" target="_blank">arm-allstar@hamvoip.org</a>>> wrote:<br>
<br>
Hello all,<br>
<br>
I have a new node up and am using an 888 with modified FOB.<br>
<br>
Just received the radio and have it online tonight, but notice after about 20 mins of use, I was missing parts of the conversation.<br>
<br>
Radio stayed online and not was solid....not packet loss. When I logged into the console to see what was happening, I saw this:<br>
<br>
<br>
[Sep 16 21:20:58] WARNING[1457]: chan_simpleusb.c:2903 simpleusb_read: Possibly stuck USB read channel. [usb]<br>
<br>
== Set device 1-1.4:1.0 to usb<br>
<br>
[Sep 16 21:20:59] WARNING[1459]: chan_simpleusb.c:1670 hidthread: Loaded parameters from simpleusb_tune_usb.conf for device usb .<br>
<br>
[Sep 16 21:20:59] WARNING[1457]: chan_simpleusb.c:2903 simpleusb_read: Possibly stuck USB read channel. [usb]<br>
<br>
[Sep 16 21:20:59] WARNING[1457]: chan_simpleusb.c:2911 simpleusb_read: Nope, USB read channel [usb] wasn't stuck after all.<br>
<br>
-- Hungup 'DAHDI/pseudo-203191'<br>
<br>
-- Hungup 'DAHDI/pseudo-141004'<br>
<br>
-- Hungup 'DAHDI/pseudo-534356'<br>
<br>
== Set device 1-1.4:1.0 to usb<br>
<br>
[Sep 16 21:21:12] WARNING[1459]: chan_simpleusb.c:1670 hidthread: Loaded parameters from simpleusb_tune_usb.conf for device usb .<br>
<br>
[Sep 16 21:21:12] WARNING[1457]: chan_simpleusb.c:2903 simpleusb_read: Possibly stuck USB read channel. [usb]<br>
<br>
[Sep 16 21:21:13] WARNING[1457]: chan_simpleusb.c:2911 simpleusb_read: Nope, USB read channel [usb] wasn't stuck after all.<br>
<br>
-- Hungup 'DAHDI/pseudo-429511028'<br>
<br>
<br>
I get about 10 seconds of sound then a usb reset. Repeating messages.<br>
<br>
I have performed another usb config, to check settings.. but same result.<br>
<br>
I can hear the node and I can transmit clearly when connected.<br>
<br>
(If I should be asking for help on a different list for this type of issue, please inform me of that list name, thank you.)<br>
<br>
--<br>
Bryan aka K6CBR<br>
<a href="http://www.k6cbr.us" rel="noreferrer" target="_blank">www.k6cbr.us</a><<a href="http://www.k6cbr.us" rel="noreferrer" target="_blank">http://www.k6cbr.<wbr>us</a>><br>
QRZ<<a href="http://www.qrz.com/db/K6CBR" rel="noreferrer" target="_blank">http://www.qrz.com/db/K6CB<wbr>R</a>><br>
43913<br>
______________________________<wbr>_________________<br>
<br>
arm-allstar mailing list<br>
<a href="mailto:arm-allstar@hamvoip.org" target="_blank">arm-allstar@hamvoip.org</a><mailto<wbr>:<a href="mailto:arm-allstar@hamvoip.org" target="_blank">arm-allstar@hamvoip.org</a>><br>
<a href="http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar" rel="noreferrer" target="_blank">http://lists.hamvoip.org/cgi-b<wbr>in/mailman/listinfo/arm-allsta<wbr>r</a><br>
<br>
Visit the BBB and RPi2 web page - <a href="http://hamvoip.org" rel="noreferrer" target="_blank">http://hamvoip.org</a><br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href="http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160917/fd52f6f8/attachment-0001.html" rel="noreferrer" target="_blank">http://lists.hamvoip.org/pipe<wbr>rmail/arm-allstar/attachments/<wbr>20160917/fd52f6f8/attachment-<wbr>0001.html</a>><br>
<br>
------------------------------<br>
<br>
Message: 3<br>
Date: Sat, 17 Sep 2016 01:20:43 -0400<br>
From: Doug Crompton <<a href="mailto:doug@crompton.com" target="_blank">doug@crompton.com</a>><br>
To: ARM Allstar <<a href="mailto:arm-allstar@hamvoip.org" target="_blank">arm-allstar@hamvoip.org</a>><br>
Subject: Re: [arm-allstar] USB reset issue<br>
Message-ID: <BLU171-W14F4B2E19C200C9774FE1<wbr>0BAF20@phx.gbl><br>
Content-Type: text/plain; charset="iso-8859-1"<br>
<br>
Hard to say exactly what this is. It could be a bad FOB or cable. What FOB are you using? Did you modify the FOB? You are using carrierfrom=usb in simpleusb.conf??? That is what the 888 requires. Are you getting a courtesy tone when you unkey? Have you changed anything else parameter wise? What version of the code are you using?<br>
73 Doug<br>
WA3DSP<br>
<a href="http://www.crompton.com/hamradio" rel="noreferrer" target="_blank">http://www.crompton.com/hamrad<wbr>io</a><br>
<br>
<br>
Date: Fri, 16 Sep 2016 21:30:34 -0700<br>
To: <a href="mailto:arm-allstar@hamvoip.org" target="_blank">arm-allstar@hamvoip.org</a><br>
Subject: [arm-allstar] USB reset issue<br>
From: <a href="mailto:arm-allstar@hamvoip.org" target="_blank">arm-allstar@hamvoip.org</a><br>
CC: <a href="mailto:bryan@k6cbr.us" target="_blank">bryan@k6cbr.us</a><br>
<br>
Hello all,<br>
I have a new node up and am using an 888 with modified FOB.<br>
Just received the radio and have it online tonight, but notice after about 20 mins of use, I was missing parts of the conversation.<br>
Radio stayed online and not was solid....not packet loss. When I logged into the console to see what was happening, I saw this:<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
[Sep 16 21:20:58] WARNING[1457]: chan_simpleusb.c:2903 simpleusb_read: Possibly stuck USB read channel. [usb]<br>
== Set device 1-1.4:1.0 to usb<br>
[Sep 16 21:20:59] WARNING[1459]: chan_simpleusb.c:1670 hidthread: Loaded parameters from simpleusb_tune_usb.conf for device usb .<br>
[Sep 16 21:20:59] WARNING[1457]: chan_simpleusb.c:2903 simpleusb_read: Possibly stuck USB read channel. [usb]<br>
[Sep 16 21:20:59] WARNING[1457]: chan_simpleusb.c:2911 simpleusb_read: Nope, USB read channel [usb] wasn't stuck after all.<br>
-- Hungup 'DAHDI/pseudo-203191'<br>
-- Hungup 'DAHDI/pseudo-141004'<br>
-- Hungup 'DAHDI/pseudo-534356'<br>
== Set device 1-1.4:1.0 to usb<br>
[Sep 16 21:21:12] WARNING[1459]: chan_simpleusb.c:1670 hidthread: Loaded parameters from simpleusb_tune_usb.conf for device usb .<br>
[Sep 16 21:21:12] WARNING[1457]: chan_simpleusb.c:2903 simpleusb_read: Possibly stuck USB read channel. [usb]<br>
[Sep 16 21:21:13] WARNING[1457]: chan_simpleusb.c:2911 simpleusb_read: Nope, USB read channel [usb] wasn't stuck after all.<br>
-- Hungup 'DAHDI/pseudo-429511028'<br>
<br>
I get about 10 seconds of sound then a usb reset. Repeating messages.<br>
I have performed another usb config, to check settings.. but same result.<br>
I can hear the node and I can transmit clearly when connected.<br>
(If I should be asking for help on a different list for this type of issue, please inform me of that list name, thank you.)<br>
--<br>
Bryan aka K6CBRwww.k6cbr.usQRZ43913<br>
<br>
______________________________<wbr>_________________<br>
<br>
arm-allstar mailing list<br>
<a href="mailto:arm-allstar@hamvoip.org" target="_blank">arm-allstar@hamvoip.org</a><br>
<a href="http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar" rel="noreferrer" target="_blank">http://lists.hamvoip.org/cgi-b<wbr>in/mailman/listinfo/arm-allsta<wbr>r</a><br>
<br>
Visit the BBB and RPi2 web page - <a href="http://hamvoip.org" rel="noreferrer" target="_blank">http://hamvoip.org</a><br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href="http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160917/e0ebc715/attachment.html" rel="noreferrer" target="_blank">http://lists.hamvoip.org/pipe<wbr>rmail/arm-allstar/attachments/<wbr>20160917/e0ebc715/attachment.<wbr>html</a>><br>
<br>
------------------------------<br>
<br>
Subject: Digest Footer<br>
<br>
______________________________<wbr>_________________<br>
arm-allstar mailing list<br>
<a href="mailto:arm-allstar@hamvoip.org" target="_blank">arm-allstar@hamvoip.org</a><br>
<a href="http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar" rel="noreferrer" target="_blank">http://lists.hamvoip.org/cgi-b<wbr>in/mailman/listinfo/arm-allsta<wbr>r</a><br>
<br>
<br>
------------------------------<br>
<br>
End of arm-allstar Digest, Vol 28, Issue 29<br>
******************************<wbr>*************<br>
</blockquote></div><br></div>
<br>______________________________<wbr>_________________<br>
<br>
arm-allstar mailing list<br>
<a href="mailto:arm-allstar@hamvoip.org">arm-allstar@hamvoip.org</a><br>
<a href="http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar" rel="noreferrer" target="_blank">http://lists.hamvoip.org/cgi-<wbr>bin/mailman/listinfo/arm-<wbr>allstar</a><br>
<br>
Visit the BBB and RPi2 web page - <a href="http://hamvoip.org" rel="noreferrer" target="_blank">http://hamvoip.org</a><br></blockquote></div><br></div><br clear="all"><div><br></div>-- <br><div class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr">Bryan aka K6CBR<div><a href="http://www.k6cbr.us" target="_blank">www.k6cbr.us</a></div><div><a href="http://www.qrz.com/db/K6CBR" target="_blank">QRZ</a></div></div></div>