<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'><font style="" color="#000000" face="Tahoma,sans-serif">Wade,<br><br> It is very unusual for DTMF to not show something in the client even if it is wrong. <br><br>asterisk -rvvv<br><br>This is what you should see as you hit each tone -<br><br>41139-Mobile*CLI> <br>[Aug 20 18:31:24] NOTICE[334]: chan_simpleusb.c:3042 simpleusb_read: Got DTMF char 1<br>[Aug 20 18:31:25] NOTICE[334]: chan_simpleusb.c:3042 simpleusb_read: Got DTMF char 2<br>[Aug 20 18:31:26] NOTICE[334]: chan_simpleusb.c:3042 simpleusb_read: Got DTMF char 3<br>[Aug 20 18:31:26] NOTICE[334]: chan_simpleusb.c:3042 simpleusb_read: Got DTMF char 4<br>[Aug 20 18:31:27] NOTICE[334]: chan_simpleusb.c:3042 simpleusb_read: Got DTMF char 5<br>[Aug 20 18:31:28] NOTICE[334]: chan_simpleusb.c:3042 simpleusb_read: Got DTMF char 6<br>[Aug 20 18:31:28] NOTICE[334]: chan_simpleusb.c:3042 simpleusb_read: Got DTMF char 7<br>[Aug 20 18:31:29] NOTICE[334]: chan_simpleusb.c:3042 simpleusb_read: Got DTMF char 8<br>[Aug 20 18:31:31] NOTICE[334]: chan_simpleusb.c:3042 simpleusb_read: Got DTMF char 9<br>[Aug 20 18:31:32] NOTICE[334]: chan_simpleusb.c:3042 simpleusb_read: Got DTMF char 0<br>[Aug 20 18:31:35] NOTICE[334]: chan_simpleusb.c:3042 simpleusb_read: Got DTMF char *<br>[Aug 20 18:31:36] NOTICE[334]: chan_simpleusb.c:3042 simpleusb_read: Got DTMF char #<br>[Aug 20 18:31:38] NOTICE[334]: chan_simpleusb.c:3042 simpleusb_read: Got DTMF char A<br>[Aug 20 18:31:39] NOTICE[334]: chan_simpleusb.c:3042 simpleusb_read: Got DTMF char B<br>[Aug 20 18:31:40] NOTICE[334]: chan_simpleusb.c:3042 simpleusb_read: Got DTMF char C<br>[Aug 20 18:31:42] NOTICE[334]: chan_simpleusb.c:3042 simpleusb_read: Got DTMF char D<br> -- Hungup 'DAHDI/pseudo-1082656715'<br><br>This was done with a Baofeng UV5R with feedback turned off and it has always worked perfectly. See below.<br><br>I find it very strange you are seeing nothing. Have you tried other radios? Levels and pre/deemphasis are prime problems. Levels should not be that critical in most cases though.<br><br>Are you sure you have node radio RX audio to Allstar? You are seeing proper levels in item 2 of simpleusb-tune-menu ? 5-6khz peaks? If you hit a DTMF key on the input radio can you hear the tone on the node radio speaker?<br><br>Baofeng radios can be a problem because if you don't mute the tones to the speaker they are picked up both through a direct route and thru the mic which often causes failure to decode. <br><br>See this -<br><br><a href="https://www.kk6jyt.com/sending-accurate-baofeng-dtmf-tones-from-the-uv-5r/" target="_blank">https://www.kk6jyt.com/sending-accurate-baofeng-dtmf-tones-from-the-uv-5r/</a><br><br id="FontBreak"></font><b><font style="font-size:16pt;" size="4">73 Doug</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">WA3DSP</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">http://www.crompton.com/hamradio</font></b><font style="font-size:16pt;" size="4"><br></font><br><br><div>> To: arm-allstar@hamvoip.org<br>> Date: Sat, 20 Aug 2016 16:39:48 -0500<br>> Subject: [arm-allstar] DTMF problem<br>> From: arm-allstar@hamvoip.org<br>> CC: wadeo@charter.net<br>> <br>> Good afternoon all,<br>> <br>> I am posting this here for a local ham friend. He just installing the <br>> latest version of the Pi software on his Pi2. Everything went ok and <br>> some small tweaks were made to work with his setup (i.e. - cleaning up <br>> audio, cor, stuff like that). He also set up the ALLMON2 for his node <br>> (27451). The issue he is running into is DTMF. When he uses RF to access <br>> his node the DTMF does nothing. Looking at the CLI it shows up as last <br>> command heard, there was just no action was taken by asterisk. He can <br>> make and break connections with both the CLI and Allmon just not over <br>> the air. We have been all over it adjusting back and forth the pre- and <br>> de- emphasis, pl filter on & off, making sure the function list was not <br>> commented out for any reason..<br>> <br>> We have tried all we can think of. Any other suggestions we could have <br>> over looked or should try?<br>> <br>> Thanks<br>> Wade<br>> KC0MLT<br>> <br>> _______________________________________________<br>> <br>> arm-allstar mailing list<br>> arm-allstar@hamvoip.org<br>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar<br>> <br>> Visit the BBB and RPi2 web page - http://hamvoip.org<br>> <br></div> </div></body>
</html>