<html><head></head><body><div style="color:#000; background-color:#fff; font-family:HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif;font-size:12px"><div id="yui_3_16_0_1_1454521497263_94077">Hello</div><div id="yui_3_16_0_1_1454521497263_94079" dir="ltr">I've had a node running successfully for several months. In the last few weeks, I've caught it being goofy. <br></div><div id="yui_3_16_0_1_1454521497263_94081" dir="ltr">It will go in a continuous TX with a 1khz tone until the local radio times out. Until today, I've not been sitting at a console where I could try to troubleshoot the problem.</div><div id="yui_3_16_0_1_1454521497263_94083" dir="ltr"><br></div><div id="yui_3_16_0_1_1454521497263_94234" dir="ltr">Following a several minute keydown tone:<br></div><div id="yui_3_16_0_1_1454521497263_94134" dir="ltr">I turned the radio off/on and it goes back to TX immediately.<br></div><div id="yui_3_16_0_1_1454521497263_94085" dir="ltr">My telnet session, which was already established, responds ok.</div><div id="yui_3_16_0_1_1454521497263_94087" dir="ltr">Looking at the LSNODES, I can see the Tx Time increasing when I refresh the screen. So Asterisk is aware of the stuck tx.</div><div id="yui_3_16_0_1_1454521497263_94107" dir="ltr">astres.sh did NOT stop the Tx mode</div><div id="yui_3_16_0_1_1454521497263_94250" dir="ltr">reboot.sh does stop the tone - which eliminates interface and radio failures.<br></div><div id="yui_3_16_0_1_1454521497263_94264" dir="ltr"><br></div><div id="yui_3_16_0_1_1454521497263_94329" dir="ltr">I've reflashed the SD card and Set static IP and done some of the firstime.sh Q/A</div><div dir="ltr">Copied the rpt.conf and simpleusb.conf over from a backup.</div><div id="yui_3_16_0_1_1454521497263_94268" dir="ltr"><br></div><div id="yui_3_16_0_1_1454521497263_94331" dir="ltr">Now, when the node comes up, I do get the IP address voice announcement.</div><div id="yui_3_16_0_1_1454521497263_94333" dir="ltr">On a simplex freq, when I key an HT, the COS led comes on ok. <br></div><div dir="ltr">Releasing HT PTT I get the node TX and continuous tone.</div><div id="yui_3_16_0_1_1454521497263_94335" dir="ltr">astres.sh DOES stop the Tx and tone, but the next COS, it goes keydown again.</div><div dir="ltr"><br></div><div dir="ltr">I've made no changes to simpleusb.conf in ages, but I do play with rpt.conf, although the version I've saved had been ok.</div><div dir="ltr"><br></div><div dir="ltr">I'm open to suggestions.</div><div dir="ltr">Thanks</div><div dir="ltr"><br></div><div dir="ltr">Barry w0iy<br></div><div dir="ltr"><br></div><div dir="ltr"><br></div><div id="yui_3_16_0_1_1454521497263_94089" dir="ltr"><br></div><div id="yui_3_16_0_1_1454521497263_94117"><br></div></div></body></html>