<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto"><div>Doug,</div><div id="AppleMailSignature"><br></div><div id="AppleMailSignature">I am running 12 volt into the URIX, and just to test I cranked the TX level to 999 and I still have audio that is still so low you can barely hear it. </div><div id="AppleMailSignature"><br></div><div id="AppleMailSignature">I'm open to suggestions as I have tried everything I can think of.</div><div id="AppleMailSignature"><br></div><div id="AppleMailSignature">Jeff</div><div id="AppleMailSignature">KD0QCN </div><div><br>On Dec 20, 2015, at 12:13 AM, Doug Crompton <<a href="mailto:doug@crompton.com">doug@crompton.com</a>> wrote:<br><br></div><blockquote type="cite"><div>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style>
<div dir="ltr"><font style="" color="#000000" face="Tahoma,sans-serif">Jeff,<br><br> The DR1(x) needs a lot of TX audio. In the mods I made I used the built-in amplifier in the DMK-URI and had the TX level set to almost max - like 950. That seemed to work OK. If you are already doing that and have very low audio then I guess yours is different for some reason. Also if you are using 5V to power the additional amp you could try running it from the suggested 12V. In that case you would need to use an external voltage to the opamp pin on the DMK-URI. Refer to the DMK web site for schematics and suggestions. Using 12V you should be able to develop more than enough audio.<br id="FontBreak"></font><font style="" face="Tahoma,sans-serif"><br></font><font style="" face="Tahoma,sans-serif">Let me know what you finally find.</font><br><br><b><font style="font-size:16pt;" size="4">73 Doug</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">WA3DSP</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4"><a href="http://www.crompton.com/hamradio">http://www.crompton.com/hamradio</a></font></b><font style="font-size:16pt;" size="4"><br></font><br><br><div><hr id="stopSpelling">From: <a href="mailto:kd0qcn@aecimo.org">kd0qcn@aecimo.org</a><br>Date: Sat, 19 Dec 2015 22:29:08 -0600<br>To: <a href="mailto:arm-allstar@hamvoip.org">arm-allstar@hamvoip.org</a><br>Subject: Re: [arm-allstar] Yaesu DR-1X Interface<br><br><div>Hey Doug and All,</div><div id="ecxAppleMailSignature"><br></div><div id="ecxAppleMailSignature">OK, here is where I am on the interface, I followed your how to on hamvoip, the only thing I did different was I am going high on COS polarity because I didn't have the items necessary to do it and I'm an hour away from the nearest radio shack. I set carrierfrom = USB to compensate. Everything seems to be working fine except I have VERY low TX audio, as in the volume on my test radio is all the way up and can barely hear it. Local speaker audio is fine. I even turned on the amplifier in the uri as suggested in the how to. What am I missing?</div><div id="ecxAppleMailSignature"><br></div><div id="ecxAppleMailSignature">Thanks,</div><div id="ecxAppleMailSignature">Jeff Carlyle </div><div id="ecxAppleMailSignature">KD0QCN <br><br></div><div><br>On Nov 30, 2015, at 3:57 PM, Doug Crompton <<a href="mailto:doug@crompton.com">doug@crompton.com</a>> wrote:<br><br></div><blockquote><div>
<style><!--
.ExternalClass .ecxhmmessage P {
padding:0px;
}
.ExternalClass body.ecxhmmessage {
font-size:12pt;
font-family:Calibri;
}
--></style>
<div dir="ltr"><font style="" color="#000000" face="Tahoma,sans-serif">As I remember the ham I modified it for had tried the back connector and something did not work. I confirmed that again but I forget what didn't work. I am checking with the other ham and if I find anything out I will let you know. So in the end it was just easier to do the same mod as the DR1. <br id="ecxFontBreak"></font><br><b><font style="font-size:16pt;" size="4">73 Doug</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">WA3DSP</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4"><a href="http://www.crompton.com/hamradio" target="_blank">http://www.crompton.com/hamradio</a></font></b><font style="font-size:16pt;" size="4"><br></font><br><br><div><hr id="ecxstopSpelling">From: <a href="mailto:kd0qcn@aecimo.org">kd0qcn@aecimo.org</a><br>Date: Mon, 30 Nov 2015 13:07:55 -0600<br>To: <a href="mailto:arm-allstar@hamvoip.org">arm-allstar@hamvoip.org</a><br>Subject: Re: [arm-allstar] Yaesu DR-1X Interface<br><br><div>Doug,</div><div id="ecxAppleMailSignature"><br></div><div id="ecxAppleMailSignature">Thanks for the clarification, would you be so kind as to expand on the problems you had using the back connector? I would like to be able to explain to the club why I need to do it the way you explained vs just using the back connector.</div><div id="ecxAppleMailSignature"><br></div><div id="ecxAppleMailSignature">Thanks,</div><div id="ecxAppleMailSignature">Jeff </div><div id="ecxAppleMailSignature">KD0QCN <br><br></div><div><br>On Nov 30, 2015, at 10:55 AM, Doug Crompton <<a href="mailto:doug@crompton.com">doug@crompton.com</a>> wrote:<br><br></div><blockquote><div>
<style><!--
.ExternalClass .ecxhmmessage P {
padding:0px;
}
.ExternalClass body.ecxhmmessage {
font-size:12pt;
font-family:Calibri;
}
--></style>
<div dir="ltr"><font style="" color="#000000" face="Tahoma,sans-serif">Jeff,<br><br> I did go on to modify a DR1X and found problems with using the back connector. I ended up modifying it the same way as the DR1 and it worked fine with Allstar as a controller. Doing it the way I show in the mod works on both the DR1 and DR1X.<br id="ecxFontBreak"></font><br><b><font style="font-size:16pt;" size="4">73 Doug</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">WA3DSP</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4"><a href="http://www.crompton.com/hamradio" target="_blank">http://www.crompton.com/hamradio</a></font></b><font style="font-size:16pt;" size="4"><br></font><br><br><div><hr id="ecxstopSpelling">To: <a href="mailto:arm-allstar@hamvoip.org">arm-allstar@hamvoip.org</a><br>From: <a href="mailto:kd0qcn@aecimo.org">kd0qcn@aecimo.org</a><br>Date: Mon, 30 Nov 2015 08:32:10 -0600<br>Subject: Re: [arm-allstar] Yaesu DR-1X Interface<br><br>
Doug,<br>
<br>
I did read the howto on <a href="http://hamvoip.org" target="_blank">hamvoip.org</a>. I was really wanting to use
the 15 pin connector on the back of the DR-1X. You stated in the
howto that you did not have access to the DR-1X and you were unsure
of how to interface with that 15 pin. That is what I'm trying to
figure out as we are trying to avoid cutting into the main harness
inside the repeater. Really all I need is something as simple as
pin 1 of URI to pin 2 of DR-1X etc... I was hoping someone had done
this already as I hate to re-invent the proverbial wheel.<br>
<br>
73,<br>
Jeff<br>
KD0QCN<br>
<br>
<div class="ecxmoz-cite-prefix">On 11/30/2015 1:42 AM, Doug Crompton
wrote:<br>
</div>
<blockquote cite="mid:BLU171-W8722A66121F226736F439DBA000@phx.gbl">
<style><!--
.ExternalClass .ecxhmmessage P {
padding:0px;
}
.ExternalClass body.ecxhmmessage {
font-size:12pt;
font-family:Calibri;
}
--></style>
<div dir="ltr"><font style="" color="#000000" face="Tahoma,sans-serif">Did you read the howto on the
<a href="http://hamvoip.org" target="_blank">hamvoip.org</a> web page?<br id="ecxFontBreak">
</font><br>
<b><font style="font-size:16pt;" size="4">73 Doug</font><font style="font-size:16pt;" size="4"><br>
</font><font style="font-size:16pt;" size="4">WA3DSP</font><font style="font-size:16pt;" size="4"><br>
</font><font style="font-size:16pt;" size="4"><a class="ecxmoz-txt-link-freetext" href="http://www.crompton.com/hamradio" target="_blank">http://www.crompton.com/hamradio</a></font></b><font style="font-size:16pt;" size="4"><br>
</font><br>
<br>
<div>> From: <a class="ecxmoz-txt-link-abbreviated" href="mailto:kd0qcn@aecimo.org">kd0qcn@aecimo.org</a><br>
> Date: Sun, 29 Nov 2015 23:57:48 -0600<br>
> To: <a class="ecxmoz-txt-link-abbreviated" href="mailto:arm-allstar@hamvoip.org">arm-allstar@hamvoip.org</a><br>
> Subject: [arm-allstar] Yaesu DR-1X Interface<br>
> <br>
> Hi All,<br>
> <br>
> My club has put me in charge of setting up a RPi2 with
Allstar and interface that with our DR-1X repeater using a DMK
URI. The problem I am having is I am seeing some information
on the DR-1 interface but not on the DR-1X. The DR-1X uses the
15 pin plug on the back of the repeater. We are not concerned
with keeping the digital side of the repeater at this point.
Has anyone done this interface and might possibly have the
schematic of how you did it, or even something as simple as
what pins you used?<br>
> <br>
> Thanks in advance for any help!<br>
> <br>
> Jeff <br>
> KD0QCN <br>
> _______________________________________________<br>
> <br>
> arm-allstar mailing list<br>
> <a class="ecxmoz-txt-link-abbreviated" href="mailto:arm-allstar@hamvoip.org">arm-allstar@hamvoip.org</a><br>
>
<a class="ecxmoz-txt-link-freetext" href="http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar" target="_blank">http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar</a><br>
> <br>
> Visit the BBB and RPi2 web page - <a class="ecxmoz-txt-link-freetext" href="http://hamvoip.org" target="_blank">http://hamvoip.org</a><br>
> <br>
</div>
</div>
<br>
<fieldset class="ecxmimeAttachmentHeader"></fieldset>
<br>
<pre>_______________________________________________
arm-allstar mailing list
<a class="ecxmoz-txt-link-abbreviated" href="mailto:arm-allstar@hamvoip.org">arm-allstar@hamvoip.org</a>
<a class="ecxmoz-txt-link-freetext" href="http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar" target="_blank">http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar</a>
Visit the BBB and RPi2 web page - <a class="ecxmoz-txt-link-freetext" href="http://hamvoip.org" target="_blank">http://hamvoip.org</a></pre>
</blockquote>
<br>
<br>_______________________________________________
arm-allstar mailing list
<a href="mailto:arm-allstar@hamvoip.org">arm-allstar@hamvoip.org</a>
<a href="http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar" target="_blank">http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar</a>
Visit the BBB and RPi2 web page - <a href="http://hamvoip.org" target="_blank">http://hamvoip.org</a></div> </div>
</div></blockquote><blockquote><div><span>_______________________________________________</span><br><span></span><br><span>arm-allstar mailing list</span><br><span><a href="mailto:arm-allstar@hamvoip.org">arm-allstar@hamvoip.org</a></span><br><span><a href="http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar" target="_blank">http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar</a></span><br><span></span><br><span>Visit the BBB and RPi2 web page - <a href="http://hamvoip.org" target="_blank">http://hamvoip.org</a></span></div></blockquote><br>_______________________________________________
arm-allstar mailing list
<a href="mailto:arm-allstar@hamvoip.org">arm-allstar@hamvoip.org</a>
<a href="http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar" target="_blank">http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar</a>
Visit the BBB and RPi2 web page - <a href="http://hamvoip.org" target="_blank">http://hamvoip.org</a></div> </div>
</div></blockquote><blockquote><div><span>_______________________________________________</span><br><span></span><br><span>arm-allstar mailing list</span><br><span><a href="mailto:arm-allstar@hamvoip.org">arm-allstar@hamvoip.org</a></span><br><span><a href="http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar" target="_blank">http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar</a></span><br><span></span><br><span>Visit the BBB and RPi2 web page - <a href="http://hamvoip.org" target="_blank">http://hamvoip.org</a></span></div></blockquote><br>_______________________________________________
arm-allstar mailing list
<a href="mailto:arm-allstar@hamvoip.org">arm-allstar@hamvoip.org</a>
<a href="http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar">http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar</a>
Visit the BBB and RPi2 web page - <a href="http://hamvoip.org">http://hamvoip.org</a></div> </div>
</div></blockquote><blockquote type="cite"><div><span>_______________________________________________</span><br><span></span><br><span>arm-allstar mailing list</span><br><span><a href="mailto:arm-allstar@hamvoip.org">arm-allstar@hamvoip.org</a></span><br><span><a href="http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar">http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar</a></span><br><span></span><br><span>Visit the BBB and RPi2 web page - <a href="http://hamvoip.org">http://hamvoip.org</a></span></div></blockquote></body></html>