<div dir="ltr">Upon further poking, I've established that my problem has nothing to do with remote bases; it seems like asterisk hangs for me after I function any linked node (anytime I use a *4 to prefix another connected node) <br><br>I tried simply connected my main BBB's simpleusb node (not a remote base node) to my other BBB's main simpleusb node (not a remote base node). I then functioned the linked BBB to do a *81. It did so properly, but then my "main" BBB locks up and wont take any more commands. <br><br>Any ideas?</div><div class="gmail_extra"><br><div class="gmail_quote">On Wed, Jun 17, 2015 at 3:06 PM, Kenneth Grimard <span dir="ltr"><<a href="mailto:n1dot1@gmail.com" target="_blank">n1dot1@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div bgcolor="#FFFFFF" text="#000000">
ok very good then<br>
<br>
i will have to try that then later when i get a bbb or raspi2,<br>
<br>
ken<div><div class="h5"><br>
<br>
<div>On 06/17/2015 05:58 PM, Sam Skolfield
wrote:<br>
</div>
<blockquote type="cite">
<div dir="ltr">Ken, like I said, the USB-serial adapter is working
perfectly with my BBB. Frequency commands, etc are working just
fine!</div>
<div class="gmail_extra"><br>
<div class="gmail_quote">On Wed, Jun 17, 2015 at 7:20 AM,
Kenneth Grimard <span dir="ltr"><<a href="mailto:n1dot1@gmail.com" target="_blank">n1dot1@gmail.com</a>></span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div bgcolor="#FFFFFF" text="#000000">
<div>as i said to you before sam I have gotten this to
work with the acid code.<br>
it will not work for full cat control using a usb serial
adapter i had tried that myself.<br>
you need a real pc with a real serial port. I am using a
pc with a pentium 4 processor with a <br>
real serial port usb to serial just does not work at
all.<br>
<br>
other wise it does work very well and you have to
program the icon 706 a certain for it to work also.<br>
<br>
i have been successful with this. unless the code can be
modified to use the gpio on a raspi.<br>
<br>
usb to serial just does not work at all not with out
modifying the code.<br>
<br>
cat control is done via the icom ci-v protocol from with
in app_rpt.c<br>
<br>
<br>
ken n1dot
<div>
<div><br>
<br>
<br>
<br>
<br>
<br>
On 6/17/2015 2:11 PM, Sam Nabkey wrote:<br>
</div>
</div>
</div>
<div>
<div>
<blockquote type="cite">
<p dir="ltr">Sam Scofield is running the xcat. I
was just trying to run an icom 706 or a Kenwood
tm700d. </p>
<p dir="ltr">Whenever you call a node a remote base,
weirdness happens to the usb adapter. It's just
not workable in the bbb or even later revs of
acid.</p>
<p dir="ltr">This interests me... I will have to run
some experiments soon.</p>
<p dir="ltr">Which radios are you running and do you
have any good scripts you could pass on and maybe
how you operate it as a user? I'd appreciate any
input.</p>
<p dir="ltr">Sam NABJEY K8SN..</p>
<div class="gmail_quote">On Jun 17, 2015 8:40 AM,
"David McGough" <<a href="mailto:kb4fxc@inttek.net" target="_blank">kb4fxc@inttek.net</a>>
wrote:<br type="attribution">
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><br>
Sam,<br>
<br>
I haven't personally used the Syntor X-cat
adapter. I looked at their<br>
yahoo group and the documentation in the "files"
section. Otherwise, I've<br>
used rigctl to manage many different radios,
with great success. The first<br>
place to start is from the BBB shell prompt,
with remote-base support<br>
disabled in app_rpt. Once you get familiar with
the various rigctl<br>
commands, macros for access via AllStar are
pretty easy--just directly<br>
call the rigctl command from AllStar.<br>
<br>
I'm guessing you're using the CI-V interface
method for the Xcat? Are you<br>
using full VFO capability, or just changing the
Syntor's modes (AKA:<br>
channels)?<br>
<br>
If simply changing modes, I'm guessing some
command something like this<br>
will work:<br>
<br>
/usr/local/bin/rigctl -r /dev/ttyUSB0 -m 311 -s
19200 -c0x20 h 27<br>
<br>
-r /dev/ttyUSB0 #### serial interface to
use...<br>
-s 19200 #### serial data rate (Xcat uses
19200, based on the manual)<br>
-c0x20 #### CI-V address (Xcat is fixed at
0x20, from the manual)<br>
h 27 #### "h 27" changes to memory channel
channel 27<br>
<br>
<br>
"rigctl -l" will get a list of supported radio
back-ends. I'd recommend<br>
trying various Icom back-ends, hopefully finding
something that works<br>
100%.<br>
<br>
rigctl -l #### Get list of available back-ends<br>
<br>
"rigctl -m 311 -u" will get a list of supported
features for a given<br>
back-end, try this. Note that the "-m 311" uses
the ic-706mk2g back-end.<br>
<br>
rigctl -m 311 -u #### Get supported features for
back-end 311<br>
<br>
<br>
I'll try to help further, once I understand more
about your setup.<br>
<br>
<br>
73, David KB4FXC<br>
<br>
<br>
<br>
On Wed, 17 Jun 2015, Sam Nabkey wrote:<br>
<br>
> That's cool. Care to share some setup
examples? I'd love to see them.<br>
><br>
> K8SN<br>
> On Jun 17, 2015 6:51 AM, "David McGough"
<<a href="mailto:kb4fxc@inttek.net" target="_blank">kb4fxc@inttek.net</a>>
wrote:<br>
><br>
> ><br>
> > Hi Sam,<br>
> ><br>
> > I'm guessing that you're trying to use
the built-in remote-base code in<br>
> > app_rpt?? If so, the only thing I can
suggest at this point is to use<br>
> > hamlib (the "rigctl" program), instead
of the built-in code.<br>
> ><br>
> > I use hamlib for several radios hosted
by BBB's, etc., and it works<br>
> > perfectly for me.<br>
> ><br>
> ><br>
> > 73, David KB4FXC<br>
> ><br>
> > On Wed, 17 Jun 2015, Sam Skolfield
wrote:<br>
> ><br>
> > > Really too bad, I'm so close to
success with what is obviously one of<br>
> > very<br>
> > > few attempts at a frequency-agile
BBB node. Looking at the console with<br>
> > any<br>
> > > level of verbosity doesn't seem
to reveal any useful information.<br>
> > > Unfortunately, it doesn't look
like I'll be able to fix this any time<br>
> > soon.<br>
> > ><br>
> > ><br>
> > > On Tue, Jun 16, 2015 at 2:50 PM,
Sam Nabkey <<a href="mailto:sam.nabkey@gmail.com" target="_blank">sam.nabkey@gmail.com</a>><br>
> > wrote:<br>
> > ><br>
> > > > I wish I had time and more
knowledge. ..<br>
> > > ><br>
> > > > It's fun to try and figure
it all out. .<br>
> > > > On Jun 16, 2015 5:06 PM,
"Sam Skolfield" <<a href="mailto:kj6qfs@gmail.com" target="_blank">kj6qfs@gmail.com</a>>
wrote:<br>
> > > ><br>
> > > >> Hi Sam!<br>
> > > >> That's frustrating!
Perhaps someone can help us fix this bug? There<br>
> > has<br>
> > > >> to be more people that
want to use frequency agile remote bases than<br>
> > just<br>
> > > >> the two Sams....<br>
> > > >><br>
> > > >> On Tue, Jun 16, 2015 at
8:05 AM, Sam Nabkey <<a href="mailto:sam.nabkey@gmail.com" target="_blank">sam.nabkey@gmail.com</a>><br>
> > wrote:<br>
> > > >><br>
> > > >>> This is one of the
same issues I experienced with the bbb code.
The<br>
> > cli<br>
> > > >>> will be blowing
can't hang up errors at you while this is going
on.<br>
> > My<br>
> > > >>> only recourse was to
reboot.<br>
> > > >>><br>
> > > >>> I went to an acid
version before the changes were made to the
channel<br>
> > > >>> drivers that was
"fixed" to work reliably on the bbb to get my<br>
> > remote to<br>
> > > >>> work.<br>
> > > >>><br>
> > > >>> Sam K8SN<br>
> > > >>> On Jun 16, 2015 8:04
AM, "Sam Skolfield" <<a href="mailto:kj6qfs@gmail.com" target="_blank">kj6qfs@gmail.com</a>>
wrote:<br>
> > > >>><br>
> > > >>>> David, I'm using
a *1 xxxx (xxxx being the node)<br>
> > > >>>><br>
> > > >>>>
_______________________________________________<br>
> > > >>>><br>
> > > >>>> arm-allstar
mailing list<br>
> > > >>>> <a href="mailto:arm-allstar@hamvoip.org" target="_blank">arm-allstar@hamvoip.org</a><br>
> > > >>>> <a href="http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar" rel="noreferrer" target="_blank">http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar</a><br>
> > > >>>><br>
> > > >>>> Visit the BBB
web page -<br>
> > > >>>> <a href="http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/" rel="noreferrer" target="_blank">http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/</a><br>
> > > >>>><br>
> > > >>><br>
> > > >>>
_______________________________________________<br>
> > > >>><br>
> > > >>> arm-allstar mailing
list<br>
> > > >>> <a href="mailto:arm-allstar@hamvoip.org" target="_blank">arm-allstar@hamvoip.org</a><br>
> > > >>> <a href="http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar" rel="noreferrer" target="_blank">http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar</a><br>
> > > >>><br>
> > > >>> Visit the BBB web
page -<br>
> > > >>> <a href="http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/" rel="noreferrer" target="_blank">http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/</a><br>
> > > >>><br>
> > > >><br>
> > > >><br>
> > > >><br>
> > > >> --<br>
> > > >> KJ6QFS<br>
> > > >> Sam Skolfield<br>
> > > >><br>
> > > >>
_______________________________________________<br>
> > > >><br>
> > > >> arm-allstar mailing list<br>
> > > >> <a href="mailto:arm-allstar@hamvoip.org" target="_blank">arm-allstar@hamvoip.org</a><br>
> > > >> <a href="http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar" rel="noreferrer" target="_blank">http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar</a><br>
> > > >><br>
> > > >> Visit the BBB web page -<br>
> > > >> <a href="http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/" rel="noreferrer" target="_blank">http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/</a><br>
> > > >><br>
> > > ><br>
> > > >
_______________________________________________<br>
> > > ><br>
> > > > arm-allstar mailing list<br>
> > > > <a href="mailto:arm-allstar@hamvoip.org" target="_blank">arm-allstar@hamvoip.org</a><br>
> > > > <a href="http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar" rel="noreferrer" target="_blank">http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar</a><br>
> > > ><br>
> > > > Visit the BBB web page -<br>
> > > > <a href="http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/" rel="noreferrer" target="_blank">http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/</a><br>
> > > ><br>
> > ><br>
> > ><br>
> > ><br>
> > ><br>
> ><br>
> >
_______________________________________________<br>
> ><br>
> > arm-allstar mailing list<br>
> > <a href="mailto:arm-allstar@hamvoip.org" target="_blank">arm-allstar@hamvoip.org</a><br>
> > <a href="http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar" rel="noreferrer" target="_blank">http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar</a><br>
> ><br>
> > Visit the BBB web page -<br>
> > <a href="http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/" rel="noreferrer" target="_blank">http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/</a><br>
> ><br>
><br>
<br>
_______________________________________________<br>
<br>
arm-allstar mailing list<br>
<a href="mailto:arm-allstar@hamvoip.org" target="_blank">arm-allstar@hamvoip.org</a><br>
<a href="http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar" rel="noreferrer" target="_blank">http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar</a><br>
<br>
Visit the BBB web page - <a href="http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/" rel="noreferrer" target="_blank">http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/</a><br>
</blockquote>
</div>
<br>
<fieldset></fieldset>
<br>
<pre>_______________________________________________
arm-allstar mailing list
<a href="mailto:arm-allstar@hamvoip.org" target="_blank">arm-allstar@hamvoip.org</a>
<a href="http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar" target="_blank">http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar</a>
Visit the BBB web page - <a href="http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/" target="_blank">http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/</a></pre>
</blockquote>
<br>
</div>
</div>
</div>
<br>
_______________________________________________<br>
<br>
arm-allstar mailing list<br>
<a href="mailto:arm-allstar@hamvoip.org" target="_blank">arm-allstar@hamvoip.org</a><br>
<a href="http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar" rel="noreferrer" target="_blank">http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar</a><br>
<br>
Visit the BBB web page - <a href="http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/" rel="noreferrer" target="_blank">http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/</a><br>
</blockquote>
</div>
<br>
<br clear="all">
<div><br>
</div>
-- <br>
<div>KJ6QFS<br>
Sam Skolfield</div>
</div>
<br>
<fieldset></fieldset>
<br>
<pre>_______________________________________________
arm-allstar mailing list
<a href="mailto:arm-allstar@hamvoip.org" target="_blank">arm-allstar@hamvoip.org</a>
<a href="http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar" target="_blank">http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar</a>
Visit the BBB web page - <a href="http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/" target="_blank">http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/</a></pre>
</blockquote>
<br>
</div></div></div>
<br>_______________________________________________<br>
<br>
arm-allstar mailing list<br>
<a href="mailto:arm-allstar@hamvoip.org">arm-allstar@hamvoip.org</a><br>
<a href="http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar" rel="noreferrer" target="_blank">http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar</a><br>
<br>
Visit the BBB web page - <a href="http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/" rel="noreferrer" target="_blank">http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/</a><br></blockquote></div><br><br clear="all"><div><br></div>-- <br><div class="gmail_signature">KJ6QFS<br>Sam Skolfield</div>
</div>