<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'><font style="" color="#000000" face="Tahoma,sans-serif">The Rpi2 uses a completely different network manager (NOT netctl) netctl should not be running on the RPi2. It you started it for some reason make sure you stop and disable it. Having two managers running can cause or sorts of problems.<br><br>On the RPi2 the manager is networkd and the setup is in /etc/systemd/network/eth0.network<br><br>Static IP ranges in most networks span the last 8 bits (/24) or 253 usable addresses. There is probably no reason to limit it to less than that unless you have an unusual situation. If you are using DHCP you don't even have to worry about the netmask. For static 255.255.255.0 or /24 is the usual mask.<br id="FontBreak"></font><br><b><font style="font-size:16pt;" size="4">73 Doug</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">WA3DSP</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">http://www.crompton.com/hamradio</font></b><font style="font-size:16pt;" size="4"><br></font><br><br><div>> From: ad2dx@ad2dx.us<br>> To: arm-allstar@hamvoip.org<br>> Date: Wed, 20 May 2015 22:40:59 +0000<br>> Subject: Re: [arm-allstar] netctl difficulty<br>> <br>> Ian,<br>> Since you’re using CIDR notation as /29, are you sure you want that? I would think you want /24 or 255.255.255.0. You might want to check the subnet mask that you have specified. Also check the default gateway since they can only talk to each other on the same subnet.<br>> Thanks and 73,<br>> Joe AD2DX<br>> <br>> > On May 20, 2015, at 5:21 PM, gm4upx@gb7jd.co.uk wrote:<br>> ><br>> > Hello,<br>> ><br>> > Has anyone experienced this:-<br>> ><br>> > I have two BBB and one PI2 and I decided that I would move them to a subnet and used the following cmds.<br>> ><br>> > edited /etc/netctl/eth0 on each and added the new ip addresses ( static ) ; I found that I only needed to enter the ipaddress like [192.168.1.1/29] and gateway like [192.168.1.10], this worked OK on the BBB's but the PI2 refuses to take the new addresses and using [netctl stop eth0], then [netctl start eth0] gives me an error that eth0 can't be loaded and I can't connect to anything other than the other two BBB's on the same subnet. I have also removed the " default " settings with [ip route del 0/0 via 192.168.0.1 dev eth0] and saved the eth0 configuration but it still refuses to play ball.<br>> ><br>> > It should be simple to do, it works on the BBB's, but not on the PI2 and after hours of trying it just won't work for me. All suggestions welcome..<br>> ><br>> > Regards,<br>> ><br>> > IAn..<br>> ><br>> ><br>> > _______________________________________________<br>> ><br>> > arm-allstar mailing list<br>> > arm-allstar@hamvoip.org<br>> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar<br>> ><br>> > Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/<br>> ><br>> <br>> This email communication and any files transmitted with it may contain confidential and or proprietary information and is provided for the use of the intended recipient only. Any review, retransmission or dissemination of this information by anyone other than the intended recipient is prohibited. If you receive this email in error, please contact the sender and delete this communication and any copies immediately. Thank you.<br>> _______________________________________________<br>> <br>> arm-allstar mailing list<br>> arm-allstar@hamvoip.org<br>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar<br>> <br>> Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/<br></div> </div></body>
</html>