<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'><font style="" color="#000000" face="Tahoma,sans-serif">Sam,<br><br> Two (or more) local nodes on different servers will talk to each other fine as long as things are setup correctly. Each server should be on a different iax port especially if you want outside connectivity. So in the case of two nodes, one could be the default 4569 and the other 4568.<br><br>You would then need routing info in each nodes rpt.conf [nodes] stanza. Each node has to know how to reach the other including the port. As an example if you had two nodes, 1998 port 4569 at 192.168.1.100 and 1999 port 4568 at 192.168.1.101 then it would look like this -<br><br>at node 1999 -<br><br>1998 = radio@192.168.0.100:4569/1998,NONE<br><br>at node 1998<br><br>1999 = radio@192.168.0.101:4568/1999,NONE<br id="FontBreak"></font><br><font style="" face="Tahoma,sans-serif">The :4569 port in the 1998 could be left out as it is the default.I like to put it in so I can readily see what is going on. </font><br><br><font style="" face="Tahoma,sans-serif">Also observe the log data as you connect. Put both nodes in the Asterisk client - asterisk -rvvv and connect from there - rpt fun <yournode#> *3<node></font><font style="" face="Tahoma,sans-serif"><br></font><font style="" face="Tahoma,sans-serif"><br></font><font style="" face="Tahoma,sans-serif">See what the log info says at both ends. It will tell you a lot. If you are not seeing anything at the receiving end then you have something wrong in your config. </font><font style="" face="Tahoma,sans-serif"><br></font><font style="" face="Tahoma,sans-serif"><br></font><font style="" face="Tahoma,sans-serif">Also make sure you can actually ping both BBB servers. </font><br><br><b><font style="font-size:16pt;" size="4">73 Doug</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">WA3DSP</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">http://www.crompton.com/hamradio</font></b><font style="font-size:16pt;" size="4"><br></font><br><br><div><hr id="stopSpelling">Date: Sat, 4 Apr 2015 00:50:45 -0700<br>From: kj6qfs@gmail.com<br>To: arm-allstar@hamvoip.org<br>Subject: [arm-allstar] need some help with LAN node linking<br><br><div dir="ltr">Hello, <div>I'm looking for a little "offline" help getting a couple of BBBs talking to each other via LAN. I've followed Doug's post to a tee, and after a night of very intense troubleshooting to try and avoid asking for help, I'm ready for some help.<br></div><div><br>I have two functional BBB setups, both of which have a pseudo node in addition to a simpleusb node. The pseudo node on each BBB is used for serial frequency control of a remote radio. This works great. Now, I want to be able to connect the two BBBs together. This simple stuff is kicking my butt!! <br><br>Thank you</div><div><div><div><br></div>-- <br><div class="ecxgmail_signature">KJ6QFS<br>Sam Skolfield</div>
</div></div></div>
<br>_______________________________________________
arm-allstar mailing list
arm-allstar@hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/</div> </div></body>
</html>