<div dir="ltr"><div><div><div><div><div><div><div><div>Doug,<br></div>That is a cool set of commands.<br>I have a questions that is probably really basic but cant seem to find an answer to it.<br></div>so if I want to use cop 7 and cop 8 for instance.<br></div>Using the standard BBB image what do I have to do?<br></div>hitting *7 or *8 when connected to the node does nothing.<br></div>I see in my reading there are a commands that are required.<br></div>*1,2,3,4, *70 and *99.<br></div>Where do we find these and where do we add extra functions?<br><br></div>Thanks<br>Dave<br><div><div><div><div><div><div><div><div><div><div><div class="gmail_extra"><br><div class="gmail_quote">On Sun, Feb 22, 2015 at 6:51 PM, Doug Crompton <span dir="ltr"><<a href="mailto:doug@crompton.com" target="_blank">doug@crompton.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div><div dir="ltr"><font face="Tahoma,sans-serif" color="#000000">Tom,<br><br> There are MANY commands to control things in Allstar... The status and COP, and ilink commands are what you want to look at. Here is a quick list but it is not up to date.<br><br></font><br><pre>* status cmds:
*
* 1 - Force ID (global)
* 2 - Give Time of Day (global)
* 3 - Give software Version (global)
* 11 - Force ID (local only)
* 12 - Give Time of Day (local only)
*
* cop (control operator) cmds:
*
* 1 - System warm boot
* 2 - System enable
* 3 - System disable
* 4 - Test Tone On/Off
* 5 - Dump System Variables on Console (debug)
* 6 - PTT (phone mode only)
* 7 - Time out timer enable
* 8 - Time out timer disable
* 9 - Autopatch enable
* 10 - Autopatch disable
* 11 - Link enable
* 12 - Link disable
* 13 - Query System State
* 14 - Change System State
* 15 - Scheduler Enable
* 16 - Scheduler Disable
* 17 - User functions (time, id, etc) enable
* 18 - User functions (time, id, etc) disable
* 19 - Select alternate hang timer
* 20 - Select standard hang timer
* 21 - Enable Parrot Mode
* 22 - Disable Parrot Mode
* 23 - Birdbath (Current Parrot Cleanup/Flush)
* 24 - Flush all telemetry
* 25 - Query last node un-keyed
* 26 - Query all nodes keyed/unkeyed
* 27 - Reset DAQ minimum on a pin
* 28 - Reset DAQ maximum on a pin
* 30 - Recall Memory Setting in Attached Xcvr
* 31 - Channel Selector for Parallel Programmed Xcvr
* 32 - Touchtone pad test: command + Digit string + # to playback all digits pressed
* 33 - Local Telemetry Output Enable
* 34 - Local Telemetry Output Disable
* 35 - Local Telemetry Output on Demand
* 36 - Foreign Link Local Output Path Enable
* 37 - Foreign Link Local Output Path Disable
* 38 - Foreign Link Local Output Path Follows Local Telemetry
* 39 - Foreign Link Local Output Path on Demand
* 40 - IRLP announce Enable
* 41 - IRLP announce Disable
* 42 - Echolink announce node # only
* 43 - Echolink announce node Callsign only
* 44 - Echolink announce node # & Callsign
* 45 - Link Activity timer enable
* 46 - Link Activity timer disable
* 47 - Reset "Link Config Changed" Flag
* 48 - Send Page Tone (Tone specs separated by parenthesis)
* 49 - Disable incoming connections (control state noice)
* 50 - Enable incoming connections (control state noicd)
* 51 - Enable sleep mode
* 52 - Disable sleep mode
* 53 - Wake up from sleep
* 54 - Go to sleep
* 55 - Parrot Once if parrot mode is disabled
*
*
* ilink cmds:
*
* 1 - Disconnect specified link
* 2 - Connect specified link -- monitor only
* 3 - Connect specified link -- tranceive
* 4 - Enter command mode on specified link
* 5 - System status
* 6 - Disconnect all links
* 11 - Disconnect a previously permanently connected link
* 12 - Permanently connect specified link -- monitor only
* 13 - Permanently connect specified link -- tranceive
* 15 - Full system status (all nodes)
* 16 - Reconnect links disconnected with "disconnect all links"
* 200 thru 215 - (Send DTMF 0-9,*,#,A-D) (200=0, 201=1, 210=*, etc)
*
* remote cmds:
*
* 1 - Recall Memory MM (*000-*099) (Gets memory from rpt.conf)
* 2 - Set VFO MMMMM*KKK*O (Mhz digits, Khz digits, Offset)
* 3 - Set Rx PL Tone HHH*D*
* 4 - Set Tx PL Tone HHH*D* (Not currently implemented with DHE RBI-1)
* 5 - Link Status (long)
* 6 - Set operating mode M (FM, USB, LSB, AM, etc)
* 100 - RX PL off (Default)
* 101 - RX PL On
* 102 - TX PL Off (Default)
* 103 - TX PL On
* 104 - Low Power
* 105 - Med Power
* 106 - Hi Power
* 107 - Bump Down 20 Hz
* 108 - Bump Down 100 Hz
* 109 - Bump Down 500 Hz
* 110 - Bump Up 20 Hz
* 111 - Bump Up 100 Hz
* 112 - Bump Up 500 Hz
* 113 - Scan Down Slow
* 114 - Scan Down Medium
* 115 - Scan Down Fast
* 116 - Scan Up Slow
* 117 - Scan Up Medium
* 118 - Scan Up Fast
* 119 - Transmit allowing auto-tune
* 140 - Link Status (brief)
* 200 thru 215 - (Send DTMF 0-9,*,#,A-D) (200=0, 201=1, 210=*, etc)
*
* playback cmds:
* specify the name of the file to be played globally (for example, 25=rpt/foo)
*
* localplay cmds:
* specify the name of the file to be played locally (for example, 25=rpt/foo)
*
* 'duplex' modes: (defaults to duplex=2)
*
* 0 - Only remote links key Tx and no main repeat audio.
* 1 - Everything other then main Rx keys Tx, no main repeat audio.
* 2 - Normal mode
* 3 - Normal except no main repeat audio.
* 4 - Normal except no main repeat audio during autopatch only
*</pre><br><br><b><font style="font-size:16pt" size="4">73 Doug</font><font style="font-size:16pt" size="4"><br></font><font style="font-size:16pt" size="4">WA3DSP</font><font style="font-size:16pt" size="4"><br></font><font style="font-size:16pt" size="4"><a href="http://www.crompton.com/hamradio" target="_blank">http://www.crompton.com/hamradio</a></font></b><font style="font-size:16pt" size="4"><br></font><br><br><div>> Date: Sun, 22 Feb 2015 12:26:47 -0800<br>> From: <a href="mailto:ve7did@dccnet.com" target="_blank">ve7did@dccnet.com</a><br>> To: <a href="mailto:arm-allstar@hamvoip.org" target="_blank">arm-allstar@hamvoip.org</a><br>> Subject: [arm-allstar] Transmitter Disable<div><div class="h5"><br>> <br>> Still new to this so trying to find my way...<br>> <br>> Have 2 nodes set up with full duplex repeater connected to each node (vhf & uhf).<br>> These 2 repeaters are normally linked together. They are at different physical<br>> locations.<br>> <br>> Trying to figure out how to disable the transmitters at each site (independently) if<br>> for some reason the repeaters are subject to abuse or interference. Also the same<br>> scenario applies to the CTCCS at the sites.<br>> <br>> Is there a macro or some way to control these functions?<br>> <br>> Hope this makes sense.<br>> <br>> ...73 Tom ve7did<br>> _______________________________________________<br>> <br>> arm-allstar mailing list<br>> <a href="mailto:arm-allstar@hamvoip.org" target="_blank">arm-allstar@hamvoip.org</a><br>> <a href="http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar" target="_blank">http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar</a><br>> <br>> Visit the BBB web page - <a href="http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/" target="_blank">http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/</a><br>> <br></div></div></div> </div></div>
<br>_______________________________________________<br>
<br>
arm-allstar mailing list<br>
<a href="mailto:arm-allstar@hamvoip.org">arm-allstar@hamvoip.org</a><br>
<a href="http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar" target="_blank">http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar</a><br>
<br>
Visit the BBB web page - <a href="http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/" target="_blank">http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/</a><br></blockquote></div><br></div></div></div></div></div></div></div></div></div></div></div></div>