<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'><font style="" color="#000000" face="Tahoma,sans-serif">Ian,<br><br> Not sure what you are doing but the stock BBB simpleusb will work just fine with that radio. Use the carrierfrom=usb or usbinvert. Not sure which is proper for that radio. Connect the radio COS to pin 8 on the URI or whatever pin is cos on the FOB you are using. Use simpleusb-tune-menu to set levels. <br><br>The only things you need to change are the carrierfrom=usb or usbinvert and the rxboost if you need more or less level. ctcssfrom should be set to none or off. plfilter=yes <br id="FontBreak"></font><br><font style="" face="Tahoma,sans-serif">You are making it much more complicated using usbradio. There is no need to do PL decode in SW, do it in the radio.</font><br><br><b><font style="font-size:16pt;" size="4">73 Doug</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">WA3DSP</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">http://www.crompton.com/hamradio</font></b><font style="font-size:16pt;" size="4"><br></font><br><br><div>> Date: Sun, 18 Jan 2015 22:49:15 +0000<br>> From: gm4upx@gb7jd.co.uk<br>> To: arm-allstar@hamvoip.org<br>> Subject: [arm-allstar] Simpleusb HELP !!<br>> <br>> Hello,<br>> <br>> I am struggling with simpleusb and would appreciate some information on <br>> the difference between usbradio and simpleusb.<br>> eg: if I change the CTCSSfrom and CARRIERfrom in usbradio.conf does that <br>> reduce the " load " on the CPU ? that seems to<br>> be the reason to choose simpleusb over usbradio ??<br>> <br>> Here's the setup:<br>> <br>> I modified a Baofeng 888 as per the link [ W0FCM's Modification of a <br>> Baofeng BF-888s as an Allstar node ], very clear and<br>> straightforward instructions, THANKS .. My plan is to use this in a <br>> mobile setup. After various attempts with simpleusb I<br>> walked away from it after shutting everything down then returned about <br>> 30 mins later, switched everything on and it worked,<br>> had a contact for 40 mins or so, had a break, feeling good !, returned <br>> and found that I couldn't tx via the node but could<br>> rx.<br>> <br>> No amount of pushing and shoving could coax the node to do what I wanted <br>> so I returned to usbradio, set the aforementioned<br>> parms from dsp to usb and I now have a working node. There is some fine <br>> tuning still to be done. With [ rxdemod=speaker ]<br>> and [ txctcssdefault=118.8 rxctcssfreqs=118.8 txctcssfreqs=118.8 ] I can <br>> access the node without any CTCSS tones.<br>> <br>> So going back to my question how can I get simpleusb to work ??<br>> <br>> Regards,<br>> Ian.<br>> <br>> _______________________________________________<br>> <br>> arm-allstar mailing list<br>> arm-allstar@hamvoip.org<br>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar<br>> <br>> Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/<br>> <br></div> </div></body>
</html>