[arm-allstar] Hamlib / GPIOs for Channel Steering

[Dave Petrie]

i use two cdm1250's vhf uhf 20 watt transmit
15 channels each
only one radio on at a time
voice announcement 
remote programming 
supermon shows the channel last selected 
i am putting one together that supports allstar hamvoip repeater on one usb sound card interface 
and a private node for the dual band remote base on another 
and usb to serial for rib programming if i can get the right adapter Prolific 2303
or i can use a comtrol ip to serial 4 port box
a lot of work 
there might be a simpler solution 
be glad ti teamviewer demo
Dave wa2kjc




Sent from my iPhone

> On Mar 11, 2024, at 5:53 PM, Josh Hatton via ARM-allstar <arm-allstar at hamvoip.org> wrote:
> 
> Good Day to All,
> 
> A few questions:
> 
> 1) What dual-band radio has the most success working with Hamlib for remote
> base feature, as a "second node" on a HamVoIP image? Any lessons learned?
> 
> 2) Has anyone successfully used Pi GPIOs to perform channel steering of
> Motorola GM300s? If so, are you able to explain how you got success in it?
> 
> 3) Does Supermon have the ability to control Hamlib<>RS232 to serial<>radio
> through the webpage?
> 
> Thanks to all for your advice.
> 
> Josh W4ZZK
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org