[arm-allstar] broadcastify setup

[Don Sayler]

So far, nothing has worked. If I connect to the node via Putty as root and
start EZStream manually, it works. But it fails 15 minutes after I drop the
Putty connection. My understanding is that if I have the 'outstreamcmd'
line in rpt.conf, I don't need to do anything else.

On Fri, Mar 1, 2024 at 2:54 PM Don Sayler <don.sayler at gmail.com> wrote:

> Hi Gerry.
>
> I'll give it a try. And now we're offline again.
>
> On Fri, Mar 1, 2024 at 2:07 PM Gerry Filby via ARM-allstar <
> arm-allstar at hamvoip.org> wrote:
>
>> I took a look at one of our configs and we don't have the line
>> <reconnect_tries> - maybe try removing that line and see if it makes a
>> difference ?
>>
>> Best,
>> Gerry.
>>
>>
>> Don Sayler via ARM-allstar wrote on 3/1/24 12:18 PM:
>> > BTW, Broadcastify says they're not getting our stream.
>> >
>> > On Fri, Mar 1, 2024, 10:05 AM Don Sayler <don.sayler at gmail.com> wrote:
>> >
>> >> Hi All.
>> >>
>> >> I had this working some time ago, and then we stopped using it and the
>> >> feed was deleted from the Broadcastify server.
>> >> I set up a new one, and reconfigured our end. But we still show as
>> >> offline. Here is my xml...
>> >>
>> >> <ezstream>
>> >>      <url>http://audio9.broadcastify.com:80/[mount id]</url>
>> >>      <sourcepassword>[pw]</sourcepassword>
>> >>      <format>MP3</format>
>> >>      <filename>stdin</filename>
>> >>      <stream_once>1</stream_once>
>> >>      <reconnect_tries>0</reconnect_tries>
>> >>      <svrinfoname>K7LWH Repeater System</svrinfoname>
>> >>      <svrinfourl>http://www.radioreference.com/</svrinfourl>
>> >>      <svrinfogenre>Amateur Radio</svrinfogenre>
>> >>      <svrinfodescription>Kirkland WA USA</svrinfodescription>
>> >>      <svrinfobitrate>16</svrinfobitrate>
>> >>      <svrinfochannels>1</svrinfochannels>
>> >>      <svrinfosamplerate>22050</svrinfosamplerate>
>> >>      <svrinfopublic>1</svrinfopublic>
>> >> </ezstream>
>> >>
>> >> This is how I'm trying to start it, from a bash script.
>> >> #!/bin/bash
>> >> #restart ezstream...
>> >> # first, quit any existing sessions...
>> >> screen -ls | grep 'ezstream' | awk '{print $1}' | xargs -I % -t screen
>> -X
>> >> -S % quit
>> >>
>> >> # next, create a new screen
>> >> screen -dmS ezstream
>> >>
>> >> # finally, start ezstream in that screen
>> >> screen -S ezstream -X stuff 'lame --preset cbr 16 -r -m m -s 8 --scale
>> 1.1
>> >> --bitwidth 16 /tmp/outsound/pipe1 - 2>/tmp/stream.status | ezstream
>> -qvc
>> >> /etc/asterisk/ezstream.xml\n'
>> >>
>> >> What am I missing? I'm not much of a linux guy, so I don't really
>> >> understand what this bash does.
>> >> Thanks.
>> >> Don
>> >>
>> >>
>> >>
>> >>
>> > _______________________________________________
>> >
>> > ARM-allstar mailing list
>> > ARM-allstar at hamvoip.org
>> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> >
>> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>
>