[arm-allstar] Interfacing to an MSF5000 repeater

[Les Keegan]

Jed:
Are these going t be connected directly to the repeater or are you going to use a remote radio with a Pi connected to it. If connecting it directly to the repeater I would use a sound card device built by Masters Communication. I use 2 RA-35's to connect 2 enwood TKR series repeater together and they work flawlessly. Not familiar on how to connectthem to the MSF5000's but if like most they probably have a DB-25 or some other type of connector on them to get PTT,COS,Audio, and ground.  Good luck with this project.

Les Keegan
N4LPK
> On 01/22/2024 7:27 PM EST Jed Barton via ARM-allstar <arm-allstar at hamvoip.org> wrote:
> 
>  
> Hey guys,  Hope everyone is doing well.  Hoping that some of you can help.
> I've got some repeaters on the air with a group.  They are running the
> MSF5000.  They're currently running IRLP nodes, but we're working on
> possibly converting everything to allstar.  It'll make life a lot easier.
> Does anyone have any detailed instructions on making this happen?  We're
> also going to use Hamvoip as the controller, so any help people can offer
> would be great.
> My ultimate goal here is to set this up, then make an image so we can just
> put it on all the machines and be done with it.
> If you guys have any recommendations of specific fobs to use that would be
> great as well.
> 
> Cheers,
> 
> Jed.n1jbc
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org