[arm-allstar] URI Issues on 2 node server

[David McGough]

Okay, I just ordered a latest and greatest version 1.5 RPi4B to test.  



On Thu, 26 Oct 2023, Dave Petrie wrote:

> Good morning, I have a PCB Rev 1.5 2GB Sony UK and I can't get it to work
> with more than one node.
> I downloaded RPi-ZZW-2-3-4_V1.7-01_Allstar from Hamvoip.org and during the
> install it asked me if
> i wanted to update and i did, twice as requested.
> 
> [root at 40039 /]# whatsmyhardware.sh
> 
> Raspberry Pi Hardware Information rev: b03115
> 
> Revision        Model   PCB Rev Memory  Notes
>   b03115           4B       1.5    2GB  Sony UK
> 
> On Thu, Oct 26, 2023 at 12:12 AM David McGough via ARM-allstar <
> arm-allstar at hamvoip.org> wrote:
> 
> >
> > Pete,
> >
> > What version of the RPi4B do you have??  Versions earlier than 1.3 would
> > only support a single USB fob.  Versions 1.4 or higher will support
> > multiple fobs.  In HamVoIP, you can check the version using the
> > whatsmyhardware.sh command from a shell (bash) prompt.  For example:
> >
> > [root at RPi-Z2W ~]# whatsmyhardware.sh
> >
> > Raspberry Pi Hardware Information rev: 902120
> >
> > Revision        Model   PCB Rev Memory  Notes
> >   902120     Zero 2 W       1.0  512MB  Sony UK
> >
> >
> >
> > ....or:
> >
> > [root at RPi4B-dev ~]# whatsmyhardware.sh
> >
> > Raspberry Pi Hardware Information rev: c03111
> >
> > Revision        Model   PCB Rev Memory  Notes
> >   c03111           4B       1.1    4GB  Sony UK
> >
> >
> > 73, David K4FXC
> >
> >
> > On Thu, 19 Oct 2023, Pete Hammerl via ARM-allstar wrote:
> >
> > > I am having a bit of trouble with one of the radio interfaces on a rpi 4
> > > server with 2 nodes.
> > >
> > > This is a new build with 2 RA-42s.  What is happening is both nodes can
> > > receive audio from our repeaters fine at all times.  Only one of the
> > nodes
> > > will transmit audio to the repeater.  What node transmits all depends on
> > > which USB URI is plugged in last.  Both will always receive and will PTT
> > > correctly on each node.  But only one will transmit audio.
> > >
> > > If I restart astrix or start the server it always defaults to my second
> > > node.  If I unplug and plug the first nodes URI back in, it will transmit
> > > audio correctly but the second node stops transmitting.
> > >
> > > It's quite strange.
> > >
> > > Any suggestions?
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > >
> >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
>