[arm-allstar] The word locked (or blocked) every few minutes

[Dustin Perdue]

Sounds like something on your system is connected to Brandmeister via MMDVM.
It does that when you key up more than 5 times in 30 seconds.

Sent from my zippo


> On Nov 29, 2023, at 09:50, John Hogenmiller via ARM-allstar <arm-allstar at hamvoip.org> wrote:
> 
> I need some help troubleshooting a weird issue.
> 
> We have this occasional issue, including this morning where all 4 of our
> linked repeaters will key up seemingly at random every few minutes and say
> the word "locked".  It's possible it's the word "blocked" with the "b"
> being cut-off because the word is said immediately on key-up.
> 
> If I watch the supermon pages or the asterisk cli with rpt debug level 5,
> this is not being caused by COS or anything on the RF side.  I can't really
> see anything corresponding to the actual key-ups themselves.  This happened
> once a month ago, we tried restarting asterisk and it eventually went away.
> This morning it happened again, but didn't go away and I did some further
> diving in.
> 
> When the message plays, the only thing I see on the asterisk CLI is a
> hangup like this:
> 
>    -- Hungup 'DAHDI/pseudo-1140051181'
> 
> I did isolate it to one individual repeater controller.   Once I unlinked
> that controller, then I can isolate the issue to just that repeater.
> Restarting asterisk doesn't resolve it.  This repeater doesn't get much
> traffic, so I can shut asterisk down. Power cycling may or may not resolve
> the issue for a few weeks, but I'd really like to figure out what's
> throwing out the "locked/blocked" message.
> 
> Thanks in advance,
> John/KB3DFZ
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org