[arm-allstar] Troubleshooting Fan Control Script

[Danny K5CG]

I sent you a direct reply with a document I created to do that.

73 
Danny, K5CG 
HH 550-000-0609 
SKCC 14257

----- Original Message -----
From: csmart8 at cogeco.ca
To: "ARM Allstar" <arm-allstar at hamvoip.org>
Cc: "Danny Siminiuk" <k5cg at hamoperator.org>
Sent: Thursday, November 9, 2023 3:01:39 PM
Subject: RE: [arm-allstar] Troubleshooting Fan Control Script

Hi Danny. Thanks again for the help with this, and for your patience. I'm
learnin here.

You wrote:
Now, have a look in /boot/config.txt, look for dtoverlay=w1-gpio,gpiopin=#
<- # is where your temp sensor needs to connect.

I'm not seeing that anywhere in /boot/config.txt

My config.txt contains only the following:

# See /boot/overlays/README for all available options

gpu_mem=64
boot_wait=1
#initramfs initramfs-linux.img followkernel

hdmi_force_hotplug=1
hdmi_drive=2


So I need to add that line.

Apparently I can type 
gpio readall 
at the prompt, to get tons of info about all the pins. What am I looking for
in there to tell me which is temperature control?

Thanks, and have a great weekend.

73
Chris
VE3RWJ